[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4fd8ad44-6e64-c4f3-6f48-420cdae8c13f@loongson.cn>
Date: Tue, 15 Nov 2022 15:17:54 +0800
From: 王洪亮 <wanghongliang@...ngson.cn>
To: musl@...ts.openwall.com
Cc: WANG Xuerui <i@...0n.name>
Subject: add loongarch64 port v6.
Hi,
I published loongarch64 port v6 in
https://github.com/loongson/musl/tree/loongarch-v3.0
Fixed the following problems:
1.Fixed some inappropriate comments in elf.h.
2.Fixed spaces and tabs used.
3.Removed crt/loongarch64/crti.s and crt/loongarch64/crtn.s.
4.Fixed the problems mentioned below email.
There are also some unmodified problems as follows:
1.Whether we still implement __clone() within __NR_clone3
syscall in LoongArch?
In latest kernel,function clone3_stack_valid(),the condition
of (kargs->stack_size == 0) is still valid, call __clone()
(within __NR_clone3 syscall) is fail.
I restore to the __NR_clone for libc-test OK temporary.
2.I don't remove __syscall7,I understand keep it without negative effects.
maybe used in the future.glibc also realize __syscall7 in LoongArch.
3.I don't remove arch/loongarch64/bits/ptrace.h,I'm not sure if it will be
used in the future.the most architectures support it.
4.The definition of extcontext[] in mcontext_t in musl is not consistent
with kernel,Because [0] is not valid C. it is not standard in musl,so use
extcontext[] instead of extcontext[0].This question has been discussed in
previous email named [musl] add loongarch64 port v3 in May.
Please check first,I will prepare a physical execution environment for
run checks.
I'm Looking forward to your reply,thanks.
Hongliang Wang.
在 2022/10/12 下午4:22, WANG Xuerui 写道:
> Hi,
>
> Sorry for the delay in reviewing this. I haven't test-run the changes
> yet but I've gone through most of it and left some comments below.
>
> Besides, MaskRay has hinted in a related LLVM patch [1] that the musl
> maintainers may want to review the current LoongArch spec where target
> triples are (more-or-less tentatively) defined and including musl ones
> ([2], see Table 12). Maintainers, opinions?
>
> [1]: https://reviews.llvm.org/D135751
> [2]:
> https://loongson.github.io/LoongArch-Documentation/LoongArch-toolchain-conventions-EN.html
>
> On 2022/8/3 16:15, 王洪亮 wrote:
>> From 7c08ecde9237a0e5de182829a947f6b02cb52cf5 Mon Sep 17 00:00:00 2001
>> From: wanghongliang <wanghongliang@...ngson.cn>
>> Date: Wed, 3 Aug 2022 02:01:23 +0800
>> Subject: [PATCH] add loongarch64 port v5.
>
> Patch revision should be inside the PATCH label, because it's not
> supposed to be
> a part of the commit message when merged.
>
> You should generate the patch like `git format-patch -v5 master` and
> ideally
> don't send it as an attachment, it makes inline replies cumbersome
> (e.g. I can't
> review and compose the mail on my phone, which I often do).
>
>>
>> Author: xiaojuanZhai <zhaixiaojuan@...ngson.cn>
>> Author: meidanLi <limeidan@...ngson.cn>
>> Author: guoqiChen <chenguoqi@...ngson.cn>
>> Author: xiaolinZhao <zhaoxiaolin@...ngson.cn>
>> Author: Fanpeng <fanpeng@...ngson.cn>
>> Author: jiantaoShan <shanjiantao@...ngson.cn>
>> Author: xuhuiQiang <qiangxuhui@...ngson.cn>
>> Author: jingyunHua <huajingyun@...ngson.cn>
>> Author: Liuxue <liuxue@...ngson.cn>
>> Author: HongliangWang <wanghongliang@...ngson.cn>
>>
>> Signed-off-by: wanghongliang <wanghongliang@...ngson.cn>
>
> As I have pointed out earlier, Chinese names are NOT camelCase, please
> use the
> native form of "Lastname Firstname" (or reversing the two) but never
> the current
> form.
>
>> ---
>> arch/loongarch64/atomic_arch.h | 53 ++++
>> arch/loongarch64/bits/alltypes.h.in | 18 ++
>> arch/loongarch64/bits/fenv.h | 20 ++
>> arch/loongarch64/bits/float.h | 16 ++
>> arch/loongarch64/bits/posix.h | 2 +
>> arch/loongarch64/bits/ptrace.h | 4 +
>> arch/loongarch64/bits/reg.h | 2 +
>> arch/loongarch64/bits/setjmp.h | 1 +
>> arch/loongarch64/bits/signal.h | 80 ++++++
>> arch/loongarch64/bits/stat.h | 18 ++
>> arch/loongarch64/bits/stdint.h | 20 ++
>> arch/loongarch64/bits/syscall.h.in | 303 +++++++++++++++++++++
>> arch/loongarch64/bits/user.h | 5 +
>> arch/loongarch64/crt_arch.h | 13 +
>> arch/loongarch64/pthread_arch.h | 13 +
>> arch/loongarch64/reloc.h | 27 ++
>> arch/loongarch64/syscall_arch.h | 137 ++++++++++
>> configure | 1 +
>> crt/loongarch64/crti.s | 15 +
>> crt/loongarch64/crtn.s | 12 +
>> include/elf.h | 65 +++++
>> src/fenv/loongarch64/fenv.S | 72 +++++
>> src/ldso/loongarch64/dlsym.s | 7 +
>> src/setjmp/loongarch64/longjmp.S | 37 +++
>> src/setjmp/loongarch64/setjmp.S | 34 +++
>> src/signal/loongarch64/restore.s | 10 +
>> src/signal/loongarch64/sigsetjmp.s | 29 ++
>> src/thread/loongarch64/__set_thread_area.s | 7 +
>> src/thread/loongarch64/__unmapself.s | 7 +
>> src/thread/loongarch64/clone.s | 47 ++++
>> src/thread/loongarch64/syscall_cp.s | 29 ++
>> 31 files changed, 1104 insertions(+)
>> create mode 100644 arch/loongarch64/atomic_arch.h
>> create mode 100644 arch/loongarch64/bits/alltypes.h.in
>> create mode 100644 arch/loongarch64/bits/fenv.h
>> create mode 100644 arch/loongarch64/bits/float.h
>> create mode 100644 arch/loongarch64/bits/posix.h
>> create mode 100644 arch/loongarch64/bits/ptrace.h
>> create mode 100644 arch/loongarch64/bits/reg.h
>> create mode 100644 arch/loongarch64/bits/setjmp.h
>> create mode 100644 arch/loongarch64/bits/signal.h
>> create mode 100644 arch/loongarch64/bits/stat.h
>> create mode 100644 arch/loongarch64/bits/stdint.h
>> create mode 100644 arch/loongarch64/bits/syscall.h.in
>> create mode 100644 arch/loongarch64/bits/user.h
>> create mode 100644 arch/loongarch64/crt_arch.h
>> create mode 100644 arch/loongarch64/pthread_arch.h
>> create mode 100644 arch/loongarch64/reloc.h
>> create mode 100644 arch/loongarch64/syscall_arch.h
>> create mode 100644 crt/loongarch64/crti.s
>> create mode 100644 crt/loongarch64/crtn.s
>> create mode 100644 src/fenv/loongarch64/fenv.S
>> create mode 100644 src/ldso/loongarch64/dlsym.s
>> create mode 100644 src/setjmp/loongarch64/longjmp.S
>> create mode 100644 src/setjmp/loongarch64/setjmp.S
>> create mode 100644 src/signal/loongarch64/restore.s
>> create mode 100644 src/signal/loongarch64/sigsetjmp.s
>> create mode 100644 src/thread/loongarch64/__set_thread_area.s
>> create mode 100644 src/thread/loongarch64/__unmapself.s
>> create mode 100644 src/thread/loongarch64/clone.s
>> create mode 100644 src/thread/loongarch64/syscall_cp.s
>>
>> diff --git a/arch/loongarch64/atomic_arch.h
>> b/arch/loongarch64/atomic_arch.h
>> new file mode 100644
>> index 00000000..bf4805c9
>> --- /dev/null
>> +++ b/arch/loongarch64/atomic_arch.h
>> @@ -0,0 +1,53 @@
>> +#define a_ll a_ll
>> +static inline int a_ll(volatile int *p)
>> +{
>> + int v;
>> + __asm__ __volatile__ (
>> + "ll.w %0, %1"
>> + : "=r"(v)
>> + : "ZC"(*p));
>> + return v;
>> +}
>> +
>> +#define a_sc a_sc
>> +static inline int a_sc(volatile int *p, int v)
>> +{
>> + int r;
>> + __asm__ __volatile__ (
>> + "sc.w %0, %1"
>> + : "=r"(r), "=ZC"(*p)
>> + : "0"(v) : "memory");
>> + return r;
>> +}
>> +
>> +#define a_ll_p a_ll_p
>> +static inline void *a_ll_p(volatile void *p)
>> +{
>> + void *v;
>> + __asm__ __volatile__ (
>> + "ll.d %0, %1"
>> + : "=r"(v)
>> + : "ZC"(*(void *volatile *)p));
>> + return v;
>> +}
>> +
>> +#define a_sc_p a_sc_p
>> +static inline int a_sc_p(volatile void *p, void *v)
>> +{
>> + long r;
>> + __asm__ __volatile__ (
>> + "sc.d %0, %1"
>> + : "=r"(r), "=ZC"(*(void *volatile *)p)
>> + : "0"(v)
>> + : "memory");
>> + return r;
>> +}
>> +
>> +#define a_barrier a_barrier
>> +static inline void a_barrier()
>> +{
>> + __asm__ __volatile__ ("dbar 0" : : : "memory");
>> +}
>> +
>> +#define a_pre_llsc a_barrier
>> +#define a_post_llsc a_barrier
>> diff --git a/arch/loongarch64/bits/alltypes.h.in
>> b/arch/loongarch64/bits/alltypes.h.in
>> new file mode 100644
>> index 00000000..d1807aca
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/alltypes.h.in
>> @@ -0,0 +1,18 @@
>> +#define _Addr long
>> +#define _Int64 long
>> +#define _Reg long
>> +
>> +#define __BYTE_ORDER 1234
>
> `#define __BYTE_ORDER __LITTLE_ENDIAN` could be more consistent with
> other
> arches.
>
>> +#define __LONG_MAX 0x7fffffffffffffffL
>> +
>> +#ifndef __cplusplus
>> +TYPEDEF int wchar_t;
>> +#endif
>> +
>> +TYPEDEF float float_t;
>> +TYPEDEF double double_t;
>> +
>> +TYPEDEF struct { long long __ll; long double __ld; } max_align_t;
>> +
>> +TYPEDEF unsigned nlink_t;
>
> `unsigned int`? Same for other bare `unsigned` usages.
>
>> +TYPEDEF int blksize_t;
>> diff --git a/arch/loongarch64/bits/fenv.h b/arch/loongarch64/bits/fenv.h
>> new file mode 100644
>> index 00000000..264cafb5
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/fenv.h
>> @@ -0,0 +1,20 @@
>> +#define FE_INEXACT 0x010000
>> +#define FE_UNDERFLOW 0x020000
>> +#define FE_OVERFLOW 0x040000
>> +#define FE_DIVBYZERO 0x080000
>> +#define FE_INVALID 0x100000
>> +
>> +#define FE_ALL_EXCEPT 0x1F0000
>> +
>> +#define FE_TONEAREST 0x000
>> +#define FE_TOWARDZERO 0x100
>> +#define FE_UPWARD 0x200
>> +#define FE_DOWNWARD 0x300
>> +
>> +typedef unsigned fexcept_t;
>> +
>> +typedef struct {
>> + unsigned __cw;
>> +} fenv_t;
>> +
>> +#define FE_DFL_ENV ((const fenv_t *) -1)
>> diff --git a/arch/loongarch64/bits/float.h
>> b/arch/loongarch64/bits/float.h
>> new file mode 100644
>> index 00000000..719c7908
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/float.h
>> @@ -0,0 +1,16 @@
>> +#define FLT_EVAL_METHOD 0
>> +
>> +#define LDBL_TRUE_MIN 6.47517511943802511092443895822764655e-4966L
>> +#define LDBL_MIN 3.36210314311209350626267781732175260e-4932L
>> +#define LDBL_MAX 1.18973149535723176508575932662800702e+4932L
>> +#define LDBL_EPSILON 1.92592994438723585305597794258492732e-34L
>> +
>> +#define LDBL_MANT_DIG 113
>> +#define LDBL_MIN_EXP (-16381)
>> +#define LDBL_MAX_EXP 16384
>> +
>> +#define LDBL_DIG 33
>> +#define LDBL_MIN_10_EXP (-4931)
>> +#define LDBL_MAX_10_EXP 4932
>> +
>> +#define DECIMAL_DIG 36
>> diff --git a/arch/loongarch64/bits/posix.h
>> b/arch/loongarch64/bits/posix.h
>> new file mode 100644
>> index 00000000..8068ce98
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/posix.h
>> @@ -0,0 +1,2 @@
>> +#define _POSIX_V6_LP64_OFF64 1
>> +#define _POSIX_V7_LP64_OFF64 1
>> diff --git a/arch/loongarch64/bits/ptrace.h
>> b/arch/loongarch64/bits/ptrace.h
>> new file mode 100644
>> index 00000000..741fc668
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/ptrace.h
>> @@ -0,0 +1,4 @@
>> +#define PTRACE_GET_THREAD_AREA 25
>> +#define PTRACE_SET_THREAD_AREA 26
>> +#define PTRACE_GET_WATCH_REGS 0xd0
>> +#define PTRACE_SET_WATCH_REGS 0xd1
>
> This file doesn't seem necessary.
>
>> diff --git a/arch/loongarch64/bits/reg.h b/arch/loongarch64/bits/reg.h
>> new file mode 100644
>> index 00000000..2633f39d
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/reg.h
>> @@ -0,0 +1,2 @@
>> +#undef __WORDSIZE
>> +#define __WORDSIZE 64
>> diff --git a/arch/loongarch64/bits/setjmp.h
>> b/arch/loongarch64/bits/setjmp.h
>> new file mode 100644
>> index 00000000..f4a7f8a3
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/setjmp.h
>> @@ -0,0 +1 @@
>> +typedef unsigned long long __jmp_buf[22];
>
> `unsigned long` would suffice?
>
>> diff --git a/arch/loongarch64/bits/signal.h
>> b/arch/loongarch64/bits/signal.h
>> new file mode 100644
>> index 00000000..16f56f21
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/signal.h
>> @@ -0,0 +1,80 @@
>> +#if defined(_POSIX_SOURCE) || defined(_POSIX_C_SOURCE) \
>> + || defined(_XOPEN_SOURCE) || defined(_GNU_SOURCE) ||
>> defined(_BSD_SOURCE)
>> +
>> +#if defined(_XOPEN_SOURCE) || defined(_GNU_SOURCE) ||
>> defined(_BSD_SOURCE)
>> +#define MINSIGSTKSZ 4096
>> +#define SIGSTKSZ 16384
>> +#endif
>> +
>> +typedef unsigned long greg_t, gregset_t[32];
>> +
>> +typedef struct sigcontext {
>> + unsigned long pc;
>> + gregset_t gregs;
>> + unsigned int flags;
>> + unsigned long extcontext[];
>> +} mcontext_t;
>
> This is different from the glibc definition:
>
> ```c
> // Linux arch/loongarch/include/uapi/asm/sigcontext.h
> struct sigcontext {
> __u64 sc_pc;
> __u64 sc_regs[32];
> __u32 sc_flags;
> __u64 sc_extcontext[0] __attribute__((__aligned__(16)));
> };
>
> #define CONTEXT_INFO_ALIGN 16
> struct sctx_info {
> __u32 magic;
> __u32 size;
> __u64 padding; /* padding to 16 bytes */
> };
>
> /* FPU context */
> #define FPU_CTX_MAGIC 0x46505501
> #define FPU_CTX_ALIGN 8p
> struct fpu_context {
> __u64 regs[32];
> __u64 fcc;
> __u32 fcsr;
> };
>
> // glibc sysdeps/unix/sysv/linux/loongarch/sys/ucontext.h
> typedef struct mcontext_t
> {
> unsigned long long __pc;
> unsigned long long __gregs[32];
> unsigned int __flags;
> unsigned long long __extcontext[0] __attribute__((__aligned__(16)));
> } mcontext_t;
> ```
>
> Which you may want to keep consistent with.
>
>> +
>> +struct sigaltstack {
>> + void *ss_sp;
>> + int ss_flags;
>> + size_t ss_size;
>> +};
>> +
>> +typedef struct __ucontext
>> +{
>> + unsigned long uc_flags;
>> + struct __ucontext *uc_link;
>> + stack_t uc_stack;
>> + sigset_t uc_sigmask;
>> + long __uc_pad;
>> + mcontext_t uc_mcontext;
>> +} ucontext_t;
>> +
>> +#define SA_NOCLDSTOP 1
>> +#define SA_NOCLDWAIT 2
>> +#define SA_SIGINFO 4
>> +#define SA_ONSTACK 0x08000000
>> +#define SA_RESTART 0x10000000
>> +#define SA_NODEFER 0x40000000
>> +#define SA_RESETHAND 0x80000000
>> +#define SA_RESTORER 0x0
>> +
>> +#endif
>> +
>> +#define SIGHUP 1
>> +#define SIGINT 2
>> +#define SIGQUIT 3
>> +#define SIGILL 4
>> +#define SIGTRAP 5
>> +#define SIGABRT 6
>> +#define SIGIOT SIGABRT
>> +#define SIGBUS 7
>> +#define SIGFPE 8
>> +#define SIGKILL 9
>> +#define SIGUSR1 10
>> +#define SIGSEGV 11
>> +#define SIGUSR2 12
>> +#define SIGPIPE 13
>> +#define SIGALRM 14
>> +#define SIGTERM 15
>> +#define SIGSTKFLT 16
>> +#define SIGCHLD 17
>> +#define SIGCONT 18
>> +#define SIGSTOP 19
>> +#define SIGTSTP 20
>> +#define SIGTTIN 21
>> +#define SIGTTOU 22
>> +#define SIGURG 23
>> +#define SIGXCPU 24
>> +#define SIGXFSZ 25
>> +#define SIGVTALRM 26
>> +#define SIGPROF 27
>> +#define SIGWINCH 28
>> +#define SIGIO 29
>> +#define SIGPOLL SIGIO
>> +#define SIGPWR 30
>> +#define SIGSYS 31
>> +#define SIGUNUSED SIGSYS
>> +
>> +#define _NSIG 65
>> diff --git a/arch/loongarch64/bits/stat.h b/arch/loongarch64/bits/stat.h
>> new file mode 100644
>> index 00000000..b7f4221b
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/stat.h
>> @@ -0,0 +1,18 @@
>> +struct stat {
>> + dev_t st_dev;
>> + ino_t st_ino;
>> + mode_t st_mode;
>> + nlink_t st_nlink;
>> + uid_t st_uid;
>> + gid_t st_gid;
>> + dev_t st_rdev;
>> + unsigned long __pad;
>> + off_t st_size;
>> + blksize_t st_blksize;
>> + int __pad2;
>> + blkcnt_t st_blocks;
>> + struct timespec st_atim;
>> + struct timespec st_mtim;
>> + struct timespec st_ctim;
>> + unsigned __unused[2];
>> +};
>> diff --git a/arch/loongarch64/bits/stdint.h
>> b/arch/loongarch64/bits/stdint.h
>> new file mode 100644
>> index 00000000..1bb147f2
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/stdint.h
>> @@ -0,0 +1,20 @@
>> +typedef int32_t int_fast16_t;
>> +typedef int32_t int_fast32_t;
>> +typedef uint32_t uint_fast16_t;
>> +typedef uint32_t uint_fast32_t;
>> +
>> +#define INT_FAST16_MIN INT32_MIN
>> +#define INT_FAST32_MIN INT32_MIN
>> +
>> +#define INT_FAST16_MAX INT32_MAX
>> +#define INT_FAST32_MAX INT32_MAX
>> +
>> +#define UINT_FAST16_MAX UINT32_MAX
>> +#define UINT_FAST32_MAX UINT32_MAX
>> +
>> +#define INTPTR_MIN INT64_MIN
>> +#define INTPTR_MAX INT64_MAX
>> +#define UINTPTR_MAX UINT64_MAX
>> +#define PTRDIFF_MIN INT64_MIN
>> +#define PTRDIFF_MAX INT64_MAX
>> +#define SIZE_MAX UINT64_MAX
>> diff --git a/arch/loongarch64/bits/syscall.h.in
>> b/arch/loongarch64/bits/syscall.h.in
>> new file mode 100644
>> index 00000000..689ff36b
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/syscall.h.in
>> @@ -0,0 +1,303 @@
>> +#define __NR_io_setup 0
>> +#define __NR_io_destroy 1
>> +#define __NR_io_submit 2
>> +#define __NR_io_cancel 3
>> +#define __NR_io_getevents 4
>> +#define __NR_setxattr 5
>> +#define __NR_lsetxattr 6
>> +#define __NR_fsetxattr 7
>> +#define __NR_getxattr 8
>> +#define __NR_lgetxattr 9
>> +#define __NR_fgetxattr 10
>> +#define __NR_listxattr 11
>> +#define __NR_llistxattr 12
>> +#define __NR_flistxattr 13
>> +#define __NR_removexattr 14
>> +#define __NR_lremovexattr 15
>> +#define __NR_fremovexattr 16
>> +#define __NR_getcwd 17
>> +#define __NR_lookup_dcookie 18
>> +#define __NR_eventfd2 19
>> +#define __NR_epoll_create1 20
>> +#define __NR_epoll_ctl 21
>> +#define __NR_epoll_pwait 22
>> +#define __NR_dup 23
>> +#define __NR_dup3 24
>> +#define __NR3264_fcntl 25
>> +#define __NR_inotify_init1 26
>> +#define __NR_inotify_add_watch 27
>> +#define __NR_inotify_rm_watch 28
>> +#define __NR_ioctl 29
>> +#define __NR_ioprio_set 30
>> +#define __NR_ioprio_get 31
>> +#define __NR_flock 32
>> +#define __NR_mknodat 33
>> +#define __NR_mkdirat 34
>> +#define __NR_unlinkat 35
>> +#define __NR_symlinkat 36
>> +#define __NR_linkat 37
>> +#define __NR_umount2 39
>> +#define __NR_mount 40
>> +#define __NR_pivot_root 41
>> +#define __NR_nfsservctl 42
>> +#define __NR3264_statfs 43
>> +#define __NR3264_fstatfs 44
>> +#define __NR3264_truncate 45
>> +#define __NR3264_ftruncate 46
>> +#define __NR_fallocate 47
>> +#define __NR_faccessat 48
>> +#define __NR_chdir 49
>> +#define __NR_fchdir 50
>> +#define __NR_chroot 51
>> +#define __NR_fchmod 52
>> +#define __NR_fchmodat 53
>> +#define __NR_fchownat 54
>> +#define __NR_fchown 55
>> +#define __NR_openat 56
>> +#define __NR_close 57
>> +#define __NR_vhangup 58
>> +#define __NR_pipe2 59
>> +#define __NR_quotactl 60
>> +#define __NR_getdents64 61
>> +#define __NR3264_lseek 62
>> +#define __NR_read 63
>> +#define __NR_write 64
>> +#define __NR_readv 65
>> +#define __NR_writev 66
>> +#define __NR_pread64 67
>> +#define __NR_pwrite64 68
>> +#define __NR_preadv 69
>> +#define __NR_pwritev 70
>> +#define __NR3264_sendfile 71
>> +#define __NR_pselect6 72
>> +#define __NR_ppoll 73
>> +#define __NR_signalfd4 74
>> +#define __NR_vmsplice 75
>> +#define __NR_splice 76
>> +#define __NR_tee 77
>> +#define __NR_readlinkat 78
>> +#define __NR_sync 81
>> +#define __NR_fsync 82
>> +#define __NR_fdatasync 83
>> +#define __NR_sync_file_range 84
>> +#define __NR_timerfd_create 85
>> +#define __NR_timerfd_settime 86
>> +#define __NR_timerfd_gettime 87
>> +#define __NR_utimensat 88
>> +#define __NR_acct 89
>> +#define __NR_capget 90
>> +#define __NR_capset 91
>> +#define __NR_personality 92
>> +#define __NR_exit 93
>> +#define __NR_exit_group 94
>> +#define __NR_waitid 95
>> +#define __NR_set_tid_address 96
>> +#define __NR_unshare 97
>> +#define __NR_futex 98
>> +#define __NR_set_robust_list 99
>> +#define __NR_get_robust_list 100
>> +#define __NR_nanosleep 101
>> +#define __NR_getitimer 102
>> +#define __NR_setitimer 103
>> +#define __NR_kexec_load 104
>> +#define __NR_init_module 105
>> +#define __NR_delete_module 106
>> +#define __NR_timer_create 107
>> +#define __NR_timer_gettime 108
>> +#define __NR_timer_getoverrun 109
>> +#define __NR_timer_settime 110
>> +#define __NR_timer_delete 111
>> +#define __NR_clock_settime 112
>> +#define __NR_clock_gettime 113
>> +#define __NR_clock_getres 114
>> +#define __NR_clock_nanosleep 115
>> +#define __NR_syslog 116
>> +#define __NR_ptrace 117
>> +#define __NR_sched_setparam 118
>> +#define __NR_sched_setscheduler 119
>> +#define __NR_sched_getscheduler 120
>> +#define __NR_sched_getparam 121
>> +#define __NR_sched_setaffinity 122
>> +#define __NR_sched_getaffinity 123
>> +#define __NR_sched_yield 124
>> +#define __NR_sched_get_priority_max 125
>> +#define __NR_sched_get_priority_min 126
>> +#define __NR_sched_rr_get_interval 127
>> +#define __NR_restart_syscall 128
>> +#define __NR_kill 129
>> +#define __NR_tkill 130
>> +#define __NR_tgkill 131
>> +#define __NR_sigaltstack 132
>> +#define __NR_rt_sigsuspend 133
>> +#define __NR_rt_sigaction 134
>> +#define __NR_rt_sigprocmask 135
>> +#define __NR_rt_sigpending 136
>> +#define __NR_rt_sigtimedwait 137
>> +#define __NR_rt_sigqueueinfo 138
>> +#define __NR_rt_sigreturn 139
>> +#define __NR_setpriority 140
>> +#define __NR_getpriority 141
>> +#define __NR_reboot 142
>> +#define __NR_setregid 143
>> +#define __NR_setgid 144
>> +#define __NR_setreuid 145
>> +#define __NR_setuid 146
>> +#define __NR_setresuid 147
>> +#define __NR_getresuid 148
>> +#define __NR_setresgid 149
>> +#define __NR_getresgid 150
>> +#define __NR_setfsuid 151
>> +#define __NR_setfsgid 152
>> +#define __NR_times 153
>> +#define __NR_setpgid 154
>> +#define __NR_getpgid 155
>> +#define __NR_getsid 156
>> +#define __NR_setsid 157
>> +#define __NR_getgroups 158
>> +#define __NR_setgroups 159
>> +#define __NR_uname 160
>> +#define __NR_sethostname 161
>> +#define __NR_setdomainname 162
>> +#define __NR_getrlimit 163
>> +#define __NR_setrlimit 164
>> +#define __NR_getrusage 165
>> +#define __NR_umask 166
>> +#define __NR_prctl 167
>> +#define __NR_getcpu 168
>> +#define __NR_gettimeofday 169
>> +#define __NR_settimeofday 170
>> +#define __NR_adjtimex 171
>> +#define __NR_getpid 172
>> +#define __NR_getppid 173
>> +#define __NR_getuid 174
>> +#define __NR_geteuid 175
>> +#define __NR_getgid 176
>> +#define __NR_getegid 177
>> +#define __NR_gettid 178
>> +#define __NR_sysinfo 179
>> +#define __NR_mq_open 180
>> +#define __NR_mq_unlink 181
>> +#define __NR_mq_timedsend 182
>> +#define __NR_mq_timedreceive 183
>> +#define __NR_mq_notify 184
>> +#define __NR_mq_getsetattr 185
>> +#define __NR_msgget 186
>> +#define __NR_msgctl 187
>> +#define __NR_msgrcv 188
>> +#define __NR_msgsnd 189
>> +#define __NR_semget 190
>> +#define __NR_semctl 191
>> +#define __NR_semtimedop 192
>> +#define __NR_semop 193
>> +#define __NR_shmget 194
>> +#define __NR_shmctl 195
>> +#define __NR_shmat 196
>> +#define __NR_shmdt 197
>> +#define __NR_socket 198
>> +#define __NR_socketpair 199
>> +#define __NR_bind 200
>> +#define __NR_listen 201
>> +#define __NR_accept 202
>> +#define __NR_connect 203
>> +#define __NR_getsockname 204
>> +#define __NR_getpeername 205
>> +#define __NR_sendto 206
>> +#define __NR_recvfrom 207
>> +#define __NR_setsockopt 208
>> +#define __NR_getsockopt 209
>> +#define __NR_shutdown 210
>> +#define __NR_sendmsg 211
>> +#define __NR_recvmsg 212
>> +#define __NR_readahead 213
>> +#define __NR_brk 214
>> +#define __NR_munmap 215
>> +#define __NR_mremap 216
>> +#define __NR_add_key 217
>> +#define __NR_request_key 218
>> +#define __NR_keyctl 219
>> +#define __NR_clone 220
>> +#define __NR_execve 221
>> +#define __NR3264_mmap 222
>> +#define __NR3264_fadvise64 223
>> +#define __NR_swapon 224
>> +#define __NR_swapoff 225
>> +#define __NR_mprotect 226
>> +#define __NR_msync 227
>> +#define __NR_mlock 228
>> +#define __NR_munlock 229
>> +#define __NR_mlockall 230
>> +#define __NR_munlockall 231
>> +#define __NR_mincore 232
>> +#define __NR_madvise 233
>> +#define __NR_remap_file_pages 234
>> +#define __NR_mbind 235
>> +#define __NR_get_mempolicy 236
>> +#define __NR_set_mempolicy 237
>> +#define __NR_migrate_pages 238
>> +#define __NR_move_pages 239
>> +#define __NR_rt_tgsigqueueinfo 240
>> +#define __NR_perf_event_open 241
>> +#define __NR_accept4 242
>> +#define __NR_recvmmsg 243
>> +#define __NR_arch_specific_syscall 244
>> +#define __NR_wait4 260
>> +#define __NR_prlimit64 261
>> +#define __NR_fanotify_init 262
>> +#define __NR_fanotify_mark 263
>> +#define __NR_name_to_handle_at 264
>> +#define __NR_open_by_handle_at 265
>> +#define __NR_clock_adjtime 266
>> +#define __NR_syncfs 267
>> +#define __NR_setns 268
>> +#define __NR_sendmmsg 269
>> +#define __NR_process_vm_readv 270
>> +#define __NR_process_vm_writev 271
>> +#define __NR_kcmp 272
>> +#define __NR_finit_module 273
>> +#define __NR_sched_setattr 274
>> +#define __NR_sched_getattr 275
>> +#define __NR_renameat2 276
>> +#define __NR_seccomp 277
>> +#define __NR_getrandom 278
>> +#define __NR_memfd_create 279
>> +#define __NR_bpf 280
>> +#define __NR_execveat 281
>> +#define __NR_userfaultfd 282
>> +#define __NR_membarrier 283
>> +#define __NR_mlock2 284
>> +#define __NR_copy_file_range 285
>> +#define __NR_preadv2 286
>> +#define __NR_pwritev2 287
>> +#define __NR_pkey_mprotect 288
>> +#define __NR_pkey_alloc 289
>> +#define __NR_pkey_free 290
>> +#define __NR_statx 291
>> +#define __NR_io_pgetevents 292
>> +#define __NR_rseq 293
>> +#define __NR_kexec_file_load 294
>> +#define __NR_pidfd_send_signal 424
>> +#define __NR_io_uring_setup 425
>> +#define __NR_io_uring_enter 426
>> +#define __NR_io_uring_register 427
>> +#define __NR_open_tree 428
>> +#define __NR_move_mount 429
>> +#define __NR_fsopen 430
>> +#define __NR_fsconfig 431
>> +#define __NR_fsmount 432
>> +#define __NR_fspick 433
>> +#define __NR_pidfd_open 434
>> +#define __NR_clone3 435
>> +#define __NR_close_range 436
>> +#define __NR_openat2 437
>> +#define __NR_pidfd_getfd 438
>> +#define __NR_faccessat2 439
>
> Mixed tab and spaces for some lines, please use spaces only for
> consistency
> with bulk of surrounding code.
>
>> +#define __NR_process_madvise 440
>> +#define __NR_fcntl __NR3264_fcntl
>> +#define __NR_statfs __NR3264_statfs
>> +#define __NR_fstatfs __NR3264_fstatfs
>> +#define __NR_truncate __NR3264_truncate
>> +#define __NR_ftruncate __NR3264_ftruncate
>> +#define __NR_lseek __NR3264_lseek
>> +#define __NR_sendfile __NR3264_sendfile
>> +#define __NR_mmap __NR3264_mmap
>> +#define __NR_fadvise64 __NR3264_fadvise64
>> diff --git a/arch/loongarch64/bits/user.h b/arch/loongarch64/bits/user.h
>> new file mode 100644
>> index 00000000..4d4cd534
>> --- /dev/null
>> +++ b/arch/loongarch64/bits/user.h
>> @@ -0,0 +1,5 @@
>> +#define ELF_NGREG 45
>> +#define ELF_NFPREG 33
>> +
>> +typedef unsigned long elf_greg_t, elf_gregset_t[ELF_NGREG];
>> +typedef double elf_fpreg_t, elf_fpregset_t[ELF_NFPREG];
>> diff --git a/arch/loongarch64/crt_arch.h b/arch/loongarch64/crt_arch.h
>> new file mode 100644
>> index 00000000..e0760d9e
>> --- /dev/null
>> +++ b/arch/loongarch64/crt_arch.h
>> @@ -0,0 +1,13 @@
>> +__asm__(
>> +".text \n"
>> +".global " START "\n"
>> +".type " START ", @function\n"
>> +START ":\n"
>> +" move $fp, $zero\n"
>> +" move $a0, $sp\n"
>> +".weak _DYNAMIC\n"
>> +".hidden _DYNAMIC\n"
>> +" la.local $a1, _DYNAMIC\n"
>> +" bstrins.d $sp, $zero, 3, 0\n"
>> +" b " START "_c\n"
>> +);
>> diff --git a/arch/loongarch64/pthread_arch.h
>> b/arch/loongarch64/pthread_arch.h
>> new file mode 100644
>> index 00000000..95ee4c7a
>> --- /dev/null
>> +++ b/arch/loongarch64/pthread_arch.h
>> @@ -0,0 +1,13 @@
>> +static inline uintptr_t __get_tp()
>> +{
>> + register uintptr_t tp __asm__("tp");
>> + __asm__ ("" : "=r" (tp) );
>
> While the current approach works, it's a bit fragile [1], and the
> simple and
> plain riscv version works too:
>
> uintptr_t tp;
> __asm__ ("move %0, $tp" : "=r"(tp));
>
> [1]:https://gcc.gnu.org/onlinedocs/gcc/Local-Register-Variables.html#Local-Register-Variables
>
>
>> + return tp;
>> +}
>> +
>> +#define TLS_ABOVE_TP
>> +#define GAP_ABOVE_TP 0
>> +
>> +#define DTP_OFFSET 0
>> +
>> +#define MC_PC pc
>> diff --git a/arch/loongarch64/reloc.h b/arch/loongarch64/reloc.h
>> new file mode 100644
>> index 00000000..865a648d
>> --- /dev/null
>> +++ b/arch/loongarch64/reloc.h
>> @@ -0,0 +1,27 @@
>> +#ifdef __loongarch64_soft_float
>
> Should be `__loongarch_soft_float`.
>
>> +#define FP_SUFFIX "-sf"
>> +#else
>> +#define FP_SUFFIX ""
>> +#endif
>> +
>> +#define LDSO_ARCH "loongarch64" FP_SUFFIX
>> +
>> +#define TPOFF_K (0x0)
>
> a simple "0" would be enough...
>
>> +
>> +#define REL_PLT R_LARCH_JUMP_SLOT
>> +#define REL_COPY R_LARCH_COPY
>> +#define REL_DTPMOD R_LARCH_TLS_DTPMOD64
>> +#define REL_DTPOFF R_LARCH_TLS_DTPREL64
>> +#define REL_TPOFF R_LARCH_TLS_TPREL64
>> +#define REL_RELATIVE R_LARCH_RELATIVE
>> +#define REL_SYMBOLIC R_LARCH_64
>> +
>> +#define CRTJMP(pc,sp) __asm__ __volatile__( \
>> + "move $sp,%1 ; jr %0" : : "r"(pc), "r"(sp) : "memory" )
>
> One space after "$sp,".
>
>> +
>> +#define GETFUNCSYM(fp, sym, got) __asm__ ( \
>> + ".hidden " #sym "\n" \
>> + ".align 8 \n" \
>> + " la.local $t1, "#sym" \n" \
>> + " move %0, $t1 \n" \
>> + : "=r"(*(fp)) : : "memory" )
>
> Does the generic version residing in ldso/dlstart.c not work?
>
>> diff --git a/arch/loongarch64/syscall_arch.h
>> b/arch/loongarch64/syscall_arch.h
>> new file mode 100644
>> index 00000000..4d5e1885
>> --- /dev/null
>> +++ b/arch/loongarch64/syscall_arch.h
>> @@ -0,0 +1,137 @@
>> +#define __SYSCALL_LL_E(x) (x)
>> +#define __SYSCALL_LL_O(x) (x)
>> +
>> +#define SYSCALL_CLOBBERLIST \
>> + "$t0", "$t1", "$t2", "$t3", \
>> + "$t4", "$t5", "$t6", "$t7", "$t8", "memory"
>> +
>> +static inline long __syscall0(long n)
>> +{
>> + register long a7 __asm__("$a7") = n;
>> + register long a0 __asm__("$a0");
>> +
>> + __asm__ __volatile__ (
>> + "syscall 0"
>> + : "=r"(a0)
>> + : "r"(a7)
>> + : SYSCALL_CLOBBERLIST);
>> + return a0;
>> +}
>> +
>> +static inline long __syscall1(long n, long a)
>> +{
>> + register long a7 __asm__("$a7") = n;
>> + register long a0 __asm__("$a0") = a;
>> +
>> + __asm__ __volatile__ (
>> + "syscall 0"
>> + : "+r"(a0)
>> + : "r"(a7)
>> + : SYSCALL_CLOBBERLIST);
>> + return a0;
>> +}
>> +
>> +static inline long __syscall2(long n, long a, long b)
>> +{
>> + register long a7 __asm__("$a7") = n;
>> + register long a0 __asm__("$a0") = a;
>> + register long a1 __asm__("$a1") = b;
>> +
>> + __asm__ __volatile__ (
>> + "syscall 0"
>> + : "+r"(a0)
>> + : "r"(a7), "r"(a1)
>> + : SYSCALL_CLOBBERLIST);
>> + return a0;
>> +}
>> +
>> +static inline long __syscall3(long n, long a, long b, long c)
>> +{
>> + register long a7 __asm__("$a7") = n;
>> + register long a0 __asm__("$a0") = a;
>> + register long a1 __asm__("$a1") = b;
>> + register long a2 __asm__("$a2") = c;
>> +
>> + __asm__ __volatile__ (
>> + "syscall 0"
>> + : "+r"(a0)
>> + : "r"(a7), "r"(a1), "r"(a2)
>> + : SYSCALL_CLOBBERLIST);
>> + return a0;
>> +}
>> +
>> +static inline long __syscall4(long n, long a, long b, long c, long d)
>> +{
>> + register long a7 __asm__("$a7") = n;
>> + register long a0 __asm__("$a0") = a;
>> + register long a1 __asm__("$a1") = b;
>> + register long a2 __asm__("$a2") = c;
>> + register long a3 __asm__("$a3") = d;
>> +
>> + __asm__ __volatile__ (
>> + "syscall 0"
>> + : "+r"(a0)
>> + : "r"(a7), "r"(a1), "r"(a2), "r"(a3)
>> + : SYSCALL_CLOBBERLIST);
>> + return a0;
>> +}
>> +
>> +static inline long __syscall5(long n, long a, long b, long c, long
>> d, long e)
>> +{
>> + register long a7 __asm__("$a7") = n;
>> + register long a0 __asm__("$a0") = a;
>> + register long a1 __asm__("$a1") = b;
>> + register long a2 __asm__("$a2") = c;
>> + register long a3 __asm__("$a3") = d;
>> + register long a4 __asm__("$a4") = e;
>> +
>> + __asm__ __volatile__ (
>> + "syscall 0"
>> + : "+r"(a0)
>> + : "r"(a7), "r"(a1), "r"(a2), "r"(a3), "r"(a4)
>> + : SYSCALL_CLOBBERLIST);
>> + return a0;
>> +}
>> +
>> +static inline long __syscall6(long n, long a, long b, long c, long
>> d, long e, long f)
>> +{
>> + register long a7 __asm__("$a7") = n;
>> + register long a0 __asm__("$a0") = a;
>> + register long a1 __asm__("$a1") = b;
>> + register long a2 __asm__("$a2") = c;
>> + register long a3 __asm__("$a3") = d;
>> + register long a4 __asm__("$a4") = e;
>> + register long a5 __asm__("$a5") = f;
>> +
>> + __asm__ __volatile__ (
>> + "syscall 0"
>> + : "+r"(a0)
>> + : "r"(a7), "r"(a1), "r"(a2), "r"(a3), "r"(a4), "r"(a5)
>> + : SYSCALL_CLOBBERLIST);
>> + return a0;
>> +}
>> +
>> +static inline long __syscall7(long n, long a, long b, long c, long
>> d, long e, long f, long g)
>> +{
>> + register long a7 __asm__("$a7") = n;
>> + register long a0 __asm__("$a0") = a;
>> + register long a1 __asm__("$a1") = b;
>> + register long a2 __asm__("$a2") = c;
>> + register long a3 __asm__("$a3") = d;
>> + register long a4 __asm__("$a4") = e;
>> + register long a5 __asm__("$a5") = f;
>> + register long a6 __asm__("$a6") = g;
>> +
>> + __asm__ __volatile__ (
>> + "syscall 0"
>> + : "+r"(a0)
>> + : "r"(a7), "r"(a1), "r"(a2), "r"(a3), "r"(a4), "r"(a5),
>> "r"(a6)
>> + : SYSCALL_CLOBBERLIST);
>> + return a0;
>> +}
>
> __syscall7 seems useless, you could remove this function altogether.
> Other syscall helpers look good though.
>
>> +
>> +#define VDSO_USEFUL
>> +#define VDSO_CGT_SYM "__vdso_clock_gettime"
>> +#define VDSO_CGT_VER "LINUX_5.10"
>
> Correct.
>
>> +
>> +#define IPC_64 0
>> diff --git a/configure b/configure
>> index 6f5453f5..68062071 100755
>> --- a/configure
>> +++ b/configure
>> @@ -328,6 +328,7 @@ i?86*) ARCH=i386 ;;
>> x86_64-x32*|x32*|x86_64*x32) ARCH=x32 ;;
>> x86_64-nt64*) ARCH=nt64 ;;
>> x86_64*) ARCH=x86_64 ;;
>> +loongarch64*) ARCH=loongarch64 ;;
>> m68k*) ARCH=m68k ;;
>> mips64*|mipsisa64*) ARCH=mips64 ;;
>> mips*) ARCH=mips ;;
>
> I think you're missing one change w.r.t. soft-float subarch detection,
> somewhere
> below (should be between similar blocks for aarch64 and m68k):
>
> if test "$ARCH" = "loongarch64" ; then
> trycppif __loongarch_soft_float "$t" && SUBARCH=${SUBARCH}-sf
> fi
>
>> diff --git a/crt/loongarch64/crti.s b/crt/loongarch64/crti.s
>> new file mode 100644
>> index 00000000..81c43e6e
>> --- /dev/null
>> +++ b/crt/loongarch64/crti.s
>> @@ -0,0 +1,15 @@
>> +.section .init
>> +.global _init
>> +_init:
>> + addi.d $sp,$sp,-16
>> + st.d $fp,$sp,0
>> + st.d $ra,$sp,8
>> + addi.d $fp,$sp,16
>> +
>> +.section .fini
>> +.global _fini
>> +_fini:
>> + addi.d $sp,$sp,-16
>> + st.d $fp,$sp,0
>> + st.d $ra,$sp,8
>> + addi.d $fp,$sp,16
>> diff --git a/crt/loongarch64/crtn.s b/crt/loongarch64/crtn.s
>> new file mode 100644
>> index 00000000..ca3fe80e
>> --- /dev/null
>> +++ b/crt/loongarch64/crtn.s
>> @@ -0,0 +1,12 @@
>> +.section .init
>> + ld.d $fp,$sp,0
>> + ld.d $ra,$sp,8
>> + addi.d $sp,$sp,16
>> + jr $ra
>> +
>> +
>> +.section .fini
>> + ld.d $fp,$sp,0
>> + ld.d $ra,$sp,8
>> + addi.d $sp,$sp,16
>> + jr $ra
>
> The crt changes shouldn't be necessary at all huh? I didn't see any
> custom asm
> for riscv, for example.
>
>> diff --git a/include/elf.h b/include/elf.h
>> index 86e2f0bb..1b0e9e71 100644
>> --- a/include/elf.h
>> +++ b/include/elf.h
>> @@ -697,6 +697,11 @@ typedef struct {
>> #define NT_MIPS_FP_MODE 0x801
>> #define NT_MIPS_MSA 0x802
>> #define NT_VERSION 1
>> +#define NT_LOONGARCH_CPUCFG 0xa00
>> +#define NT_LOONGARCH_CSR 0xa01
>> +#define NT_LOONGARCH_LSX 0xa02
>> +#define NT_LOONGARCH_LASX 0xa03
>> +#define NT_LOONGARCH_LBT 0xa04
>>
>>
>>
>> @@ -3288,6 +3293,66 @@ enum
>> #define R_RISCV_SET32 56
>> #define R_RISCV_32_PCREL 57
>>
>> +/* LoongArch ELF Flags */
>> +#define EM_LOONGARCH 258
>
> Please move this definition to the EM_* group above.
>
>> +
>> +#define EF_LARCH_ABI 0x07
>> +#define EF_LARCH_ABI_LP64D 0x03
>> +
>> +/* LoongArch specific dynamic relocations. */
>> +#define R_LARCH_NONE 0
>> +#define R_LARCH_32 1
>> +#define R_LARCH_64 2
>> +#define R_LARCH_RELATIVE 3
>> +#define R_LARCH_COPY 4
>> +#define R_LARCH_JUMP_SLOT 5
>> +#define R_LARCH_TLS_DTPMOD32 6
>> +#define R_LARCH_TLS_DTPMOD64 7
>> +#define R_LARCH_TLS_DTPREL32 8
>> +#define R_LARCH_TLS_DTPREL64 9
>> +#define R_LARCH_TLS_TPREL32 10
>> +#define R_LARCH_TLS_TPREL64 11
>> +#define R_LARCH_IRELATIVE 12
>> +#define R_LARCH_MARK_LA 20
>> +#define R_LARCH_MARK_PCREL 21
>> +#define R_LARCH_SOP_PUSH_PCREL 22
>> +#define R_LARCH_SOP_PUSH_ABSOLUTE 23
>> +#define R_LARCH_SOP_PUSH_DUP 24
>> +#define R_LARCH_SOP_PUSH_GPREL 25
>> +#define R_LARCH_SOP_PUSH_TLS_TPREL 26
>> +#define R_LARCH_SOP_PUSH_TLS_GOT 27
>> +#define R_LARCH_SOP_PUSH_TLS_GD 28
>> +#define R_LARCH_SOP_PUSH_PLT_PCREL 29
>> +#define R_LARCH_SOP_ASSERT 30
>> +#define R_LARCH_SOP_NOT 31
>> +#define R_LARCH_SOP_SUB 32
>> +#define R_LARCH_SOP_SL 33
>> +#define R_LARCH_SOP_SR 34
>> +#define R_LARCH_SOP_ADD 35
>> +#define R_LARCH_SOP_AND 36
>> +#define R_LARCH_SOP_IF_ELSE 37
>> +#define R_LARCH_SOP_POP_32_S_10_5 38
>> +#define R_LARCH_SOP_POP_32_U_10_12 39
>> +#define R_LARCH_SOP_POP_32_S_10_12 40
>> +#define R_LARCH_SOP_POP_32_S_10_16 41
>> +#define R_LARCH_SOP_POP_32_S_10_16_S2 42
>> +#define R_LARCH_SOP_POP_32_S_5_20 43
>> +#define R_LARCH_SOP_POP_32_S_0_5_10_16_S2 44
>> +#define R_LARCH_SOP_POP_32_S_0_10_10_16_S2 45
>> +#define R_LARCH_SOP_POP_32_U 46
>> +#define R_LARCH_ADD8 47
>> +#define R_LARCH_ADD16 48
>> +#define R_LARCH_ADD24 49
>> +#define R_LARCH_ADD32 50
>> +#define R_LARCH_ADD64 51
>> +#define R_LARCH_SUB8 52
>> +#define R_LARCH_SUB16 53
>> +#define R_LARCH_SUB24 54
>> +#define R_LARCH_SUB32 55
>> +#define R_LARCH_SUB64 56
>> +#define R_LARCH_GNU_VTINHERIT 57
>> +#define R_LARCH_GNU_VTENTRY 58
>
> You may want to update the list here to include new reloc types in the
> LoongArch
> ELF psABI v2.00. Check the latest binutils code for details. The e_flags
> constants need updating too.
>
>> +
>> #ifdef __cplusplus
>> }
>> #endif
>> diff --git a/src/fenv/loongarch64/fenv.S b/src/fenv/loongarch64/fenv.S
>> new file mode 100644
>> index 00000000..aa012c97
>> --- /dev/null
>> +++ b/src/fenv/loongarch64/fenv.S
>> @@ -0,0 +1,72 @@
>> +#ifndef __loongarch_soft_float
>> +
>> +.global feclearexcept
>> +.type feclearexcept,@function
>
> Convention is to use a space after the directive, not a tab (it seems
> only the
> mips port is using tabs here).
>
>> +feclearexcept:
>> + li.w $a1, 0x1f0000
>> + and $a0, $a0, $a1
>> + movfcsr2gr $a1, $r0
>> + or $a1, $a1, $a0
>> + xor $a1, $a1, $a0
>> + movgr2fcsr $r0, $a1
>> + li.w $a0, 0
>> + jr $ra
>
> Mixed space and tabs after the mnemonics; there are similar mistakes all
> around so please fix all of them.
>
> Other than that, the implementation isn't optimal, you should be able
> to use
> `orn` to quickly clear the bits specified by the mask. Or you could
> consider
> using the other FCSR selectors to hopefully avoid masking altogether.
>
>> +
>> +.global feraiseexcept
>> +.type feraiseexcept,@function
>> +feraiseexcept:
>> + li.w $a1, 0x1f0000
>> + and $a0, $a0, $a1
>> + movfcsr2gr $a1, $r0
>> + or $a1, $a1, $a0
>> + movgr2fcsr $r0, $a1
>> + li.w $a0, 0
>> + jr $ra
>> +
>> +.global fetestexcept
>> +.type fetestexcept,@function
>> +fetestexcept:
>> + li.w $a1, 0x1f0000
>> + and $a0, $a0, $a1
>> + movfcsr2gr $a1, $r0
>> + and $a0, $a1, $a0
>> + jr $ra
>> +
>> +.global fegetround
>> +.type fegetround,@function
>> +fegetround:
>> + movfcsr2gr $a0, $r0
>> + andi $a0, $a0, 0x300 //fcsr0.RM
>> + jr $ra
>> +
>> +.global __fesetround
>> +.hidden __fesetround
>> +.type __fesetround,@function
>> +__fesetround:
>> + movfcsr2gr $a1, $r0
>> + li.w $a2, -769 //0xfffffcff
>> + and $a1, $a1, $a2
>> + or $a1, $a1, $a0
>> + movgr2fcsr $r0, $a1
>> + li.w $a0, 0
>> + jr $ra
>> +
>> +.global fegetenv
>> +.type fegetenv,@function
>> +fegetenv:
>> + movfcsr2gr $a1, $r0
>> + st.w $a1, $a0, 0
>> + li.w $a0, 0
>> + jr $ra
>> +
>> +.global fesetenv
>> +.type fesetenv,@function
>> +fesetenv:
>> + addi.d $a1, $a0, 1
>> + beq $a1, $r0, 1f
>> + ld.w $a1, $a0, 0
>> +1: movgr2fcsr $r0, $a1
>> + li.w $a0, 0
>> + jr $ra
>> +
>> +#endif
>> diff --git a/src/ldso/loongarch64/dlsym.s b/src/ldso/loongarch64/dlsym.s
>> new file mode 100644
>> index 00000000..edb8214c
>> --- /dev/null
>> +++ b/src/ldso/loongarch64/dlsym.s
>> @@ -0,0 +1,7 @@
>> +.global dlsym
>> +.hidden __dlsym
>> +.type dlsym,@function
>> +dlsym:
>> + move $a2, $ra
>> + la.global $t0, __dlsym
>> + jr $t0
>> diff --git a/src/setjmp/loongarch64/longjmp.S
>> b/src/setjmp/loongarch64/longjmp.S
>> new file mode 100644
>> index 00000000..4186974f
>> --- /dev/null
>> +++ b/src/setjmp/loongarch64/longjmp.S
>> @@ -0,0 +1,37 @@
>> +.global _longjmp
>> +.global longjmp
>> +.type _longjmp,@function
>> +.type longjmp,@function
>> +_longjmp:
>> +longjmp:
>> + move $t5, $a0
>> + move $a0, $a1
>> +
>> + bne $a0, $zero, 1f
>
> bnez
>
>> + addi.d $a0, $a0, 1
>> +
>> +1:
>> + ld.d $ra, $t5, 0
>> + ld.d $sp, $t5, 8
>> + ld.d $r21,$t5, 16
>> + ld.d $fp, $t5, 24
>> + ld.d $s0, $t5, 32
>> + ld.d $s1, $t5, 40
>> + ld.d $s2, $t5, 48
>> + ld.d $s3, $t5, 56
>> + ld.d $s4, $t5, 64
>> + ld.d $s5, $t5, 72
>> + ld.d $s6, $t5, 80
>> + ld.d $s7, $t5, 88
>> + ld.d $s8, $t5, 96
>> +#ifndef __loongarch64_soft_float
>
> `__loongarch_soft_float`.
>
>> + fld.d $fs0, $t5, 104
>> + fld.d $fs1, $t5, 112
>> + fld.d $fs2, $t5, 120
>> + fld.d $fs3, $t5, 128
>> + fld.d $fs4, $t5, 136
>> + fld.d $fs5, $t5, 144
>> + fld.d $fs6, $t5, 152
>> + fld.d $fs7, $t5, 160
>> +#endif
>> + jr $ra
>> diff --git a/src/setjmp/loongarch64/setjmp.S
>> b/src/setjmp/loongarch64/setjmp.S
>> new file mode 100644
>> index 00000000..f3bb7c70
>> --- /dev/null
>> +++ b/src/setjmp/loongarch64/setjmp.S
>> @@ -0,0 +1,34 @@
>> +.global __setjmp
>> +.global _setjmp
>> +.global setjmp
>> +.type __setjmp,@function
>> +.type _setjmp,@function
>> +.type setjmp,@function
>> +__setjmp:
>> +_setjmp:
>> +setjmp:
>> + st.d $ra, $a0, 0
>> + st.d $sp, $a0, 8
>> + st.d $r21,$a0, 16
>> + st.d $fp, $a0, 24
>> + st.d $s0, $a0, 32
>> + st.d $s1, $a0, 40
>> + st.d $s2, $a0, 48
>> + st.d $s3, $a0, 56
>> + st.d $s4, $a0, 64
>> + st.d $s5, $a0, 72
>> + st.d $s6, $a0, 80
>> + st.d $s7, $a0, 88
>> + st.d $s8, $a0, 96
>> +#ifndef __loongarch64_soft_float
>
> `__loongarch_soft_float`.
>
>> + fst.d $fs0, $a0, 104
>> + fst.d $fs1, $a0, 112
>> + fst.d $fs2, $a0, 120
>> + fst.d $fs3, $a0, 128
>> + fst.d $fs4, $a0, 136
>> + fst.d $fs5, $a0, 144
>> + fst.d $fs6, $a0, 152
>> + fst.d $fs7, $a0, 160
>> +#endif
>> + xor $a0, $a0, $a0
>
> move $a0, $zero
>
>> + jr $ra
>> diff --git a/src/signal/loongarch64/restore.s
>> b/src/signal/loongarch64/restore.s
>> new file mode 100644
>> index 00000000..bca17eb7
>> --- /dev/null
>> +++ b/src/signal/loongarch64/restore.s
>> @@ -0,0 +1,10 @@
>> +.global __restore_rt
>> +.global __restore
>> +.hidden __restore_rt
>> +.hidden __restore
>> +.type __restore_rt,@function
>> +.type __restore,@function
>> +__restore_rt:
>> +__restore:
>> + li.w $a7, 139
>> + syscall 0
>> diff --git a/src/signal/loongarch64/sigsetjmp.s
>> b/src/signal/loongarch64/sigsetjmp.s
>> new file mode 100644
>> index 00000000..abd96c62
>> --- /dev/null
>> +++ b/src/signal/loongarch64/sigsetjmp.s
>> @@ -0,0 +1,29 @@
>> +.global sigsetjmp
>> +.global __sigsetjmp
>> +.type sigsetjmp,@function
>> +.type __sigsetjmp,@function
>> +sigsetjmp:
>> +__sigsetjmp:
>> + move $t5, $a0
>> + move $t6, $a1
>> +
>> + # comparing save mask with 0, if equals to 0 then
>> + # sigsetjmp is equal to setjmp.
>> + beq $t6, $zero, 1f
>> + st.d $ra, $t5, 168
>> +
>> + # save base of got so that we can use it later
>> + # once we return from 'longjmp'
>> + la.global $t8, setjmp
>> + jirl $ra, $t8, 0
>> +
>> + move $a1, $a0 # Return from 'setjmp' or 'longjmp'
>> + ld.d $ra, $t5, 168 # Restore ra of sigsetjmp
>> + move $a0, $t5
>> +
>> +.hidden __sigsetjmp_tail
>> + la.global $t8, __sigsetjmp_tail
>> + jr $t8
>> +1:
>> + la.global $t8, setjmp
>> + jr $t8
>
> This is crazy complicated compared to the riscv port, why is the
> juggling between a0/a1 and t5/t6 necessary?
>
>> diff --git a/src/thread/loongarch64/__set_thread_area.s
>> b/src/thread/loongarch64/__set_thread_area.s
>> new file mode 100644
>> index 00000000..6fd09a92
>> --- /dev/null
>> +++ b/src/thread/loongarch64/__set_thread_area.s
>> @@ -0,0 +1,7 @@
>> +.global __set_thread_area
>> +.hidden __set_thread_area
>> +.type __set_thread_area,@function
>> +__set_thread_area:
>> + move $tp, $a0
>> + ori $a0, $zero, 0
>
> `move $a0, $zero` is enough.
>
>> + jr $ra
>> diff --git a/src/thread/loongarch64/__unmapself.s
>> b/src/thread/loongarch64/__unmapself.s
>> new file mode 100644
>> index 00000000..3a44b850
>> --- /dev/null
>> +++ b/src/thread/loongarch64/__unmapself.s
>> @@ -0,0 +1,7 @@
>> +.global __unmapself
>> +.type __unmapself, @function
>> +__unmapself:
>> + li.d $a7, 215 # call munmap
>> + syscall 0
>> + li.d $a7, 93 # call exit
>> + syscall 0
>> diff --git a/src/thread/loongarch64/clone.s
>> b/src/thread/loongarch64/clone.s
>> new file mode 100644
>> index 00000000..86e69cfa
>> --- /dev/null
>> +++ b/src/thread/loongarch64/clone.s
>> @@ -0,0 +1,47 @@
>> +#__clone(func, stack, flags, arg, ptid, tls, ctid)
>> +# a0, a1, a2, a3, a4, a5, a6
>> +# sys_clone3(struct clone_args *cl_args, size_t size)
>> +# a0 a1
>> +
>> +.global __clone
>> +.hidden __clone
>> +.type __clone,@function
>> +__clone:
>> + # Save function pointer and argument pointer on new thread stack
>> + addi.d $a1, $a1, -16
>> + st.d $a0, $a1, 0 # save function pointer
>> + st.d $a3, $a1, 8 # save argument pointer
>> +
>> + li.d $t0, ~0x004000ff # mask CSIGNAL and CLONE_DETACHED
>> + and $t1, $a2, $t0 # cl_args.flags
>> + li.d $t0, 0x000000ff # CSIGNAL
>> + and $t2, $a2, $t0 # cl_args.exit_signal
>> +
>> + bstrins.d $sp, $zero, 3, 0 # align stack to 16 bytes
>> + addi.d $sp, $sp, -88 # struct clone_args
>> + st.d $t1, $sp, 0 # flags
>> + st.d $a4, $sp, 8 # pidfd
>> + st.d $a6, $sp, 16 # child_tid
>> + st.d $a4, $sp, 24 # parent_tid
>> + st.d $t2, $sp, 32 # exit_signal
>> + st.d $a1, $sp, 40 # stack
>> + st.d $zero, $sp, 48 # stack_size
>> + st.d $a5, $sp, 56 # tls
>> + st.d $zero, $sp, 64 # set_tid
>> + st.d $zero, $sp, 72 # set_tid_size
>> + st.d $zero, $sp, 80 # cgroup
>> +
>> + move $a0, $sp
>> + li.d $a1, 88
>> + li.d $a7, 435 # __NR_clone3
>> + syscall 0 # call clone3
>> +
>> + beqz $a0, 1f # whether child process
>> + addi.d $sp, $sp, 88
>> + jr $ra # parent process return
>> +1:
>> + ld.d $t8, $sp, 0 # function pointer
>> + ld.d $a0, $sp, 8 # argument pointer
>> + jirl $ra, $t8, 0 # call the user's function
>> + li.d $a7, 93
>> + syscall 0 # child process exit
>
> Do we still want to implement clone functionality entirely with
> clone3, given the
> previous conclusion of keeping clone(2) for existing sandboxes to
> continue to work?
>
>> diff --git a/src/thread/loongarch64/syscall_cp.s
>> b/src/thread/loongarch64/syscall_cp.s
>> new file mode 100644
>> index 00000000..9f57d254
>> --- /dev/null
>> +++ b/src/thread/loongarch64/syscall_cp.s
>> @@ -0,0 +1,29 @@
>> +.global __cp_begin
>> +.hidden __cp_begin
>> +.global __cp_end
>> +.hidden __cp_end
>> +.global __cp_cancel
>> +.hidden __cp_cancel
>> +.hidden __cancel
>> +.global __syscall_cp_asm
>> +.hidden __syscall_cp_asm
>> +.type __syscall_cp_asm,@function
>> +
>> +__syscall_cp_asm:
>> +__cp_begin:
>> + ld.w $a0, $a0, 0
>> + bnez $a0, __cp_cancel
>> + move $t8, $a1 # reserve system call number
>> + move $a0, $a2
>> + move $a1, $a3
>> + move $a2, $a4
>> + move $a3, $a5
>> + move $a4, $a6
>> + move $a5, $a7
>> + move $a7, $t8
>> + syscall 0
>> +__cp_end:
>> + jr $ra
>> +__cp_cancel:
>> + la.local $t8, __cancel
>> + jr $t8
>> --
>> 2.36.0
>>
>>
Powered by blists - more mailing lists
Confused about mailing lists and their use?
Read about mailing lists on Wikipedia
and check out these
guidelines on proper formatting of your messages.
