[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFPCfQya+vdiRihWDDRPLnCTex_bbSfdKBj8uiNc70ArzpKpvg@mail.gmail.com>
Date: Mon, 15 Dec 2014 22:10:18 -0600
From: will cunningham <willpanther@...il.com>
To: sabotage@...ts.openwall.com
Subject: Re: raspberry PI kernel compile
Thanks, Paul, adding the ARM_ARCH=6 seems to have worked, as the version
error is gone. However I'm not getting past the second error with one
change:
"cat: can't open '/src/KEEP/linux.config /src/KEEP/linux.config.armv6l' :
No such file or directory"
Before adding the ARM_ARCH it was /src/KEEP/linux.config.armvl, and now
it's arm6vl, so the config seems effective.
Both files ARE there, so I'm guessing I need to make a soft link, or what?
Thanks,
Will
On Sun, Dec 14, 2014 at 6:09 PM, will cunningham <willpanther@...il.com>
wrote:
>
> That doesn't make sense; if it can read export from a script then it
> should be available on the command line methinks.
>
> Anyway, it's compiling on the external hard drive now, and thanks again
> for your help, as I've added it to the config file,
>
> Will
>
> On Sun, Dec 14, 2014 at 5:33 PM, will cunningham <willpanther@...il.com>
> wrote:
>>
>> I was trying to export from the command line, but export isn't showing up
>> on from my chrooted environment from the command line so I figured I needed
>> to compile more of the base system, but of course I could put it in the
>> config file instead of export from the command line.
>>
>> Now I'll use your method as I ran out of space as well on my sd card
>> compiling the rest. Fortunately I bought a USB external hard drive for
>> just this kind of thing, so I'll give it all another run installing
>> sabotage there, and I'll put the export in the config file as you suggest.
>>
>> Onward,
>>
>> Will
>>
>> On Sun, Dec 14, 2014 at 4:54 PM, Paul Schutte <sjpschutte@...il.com>
>> wrote:
>>>
>>> Maybe I am not on the same page as you, but it should not be a big thing.
>>>
>>> In essence:
>>>
>>> ./enter-chroot
>>> cd /src
>>> vi config
>>>
>>> Now add "export ARM_ARCH=6" to the bottom of the file, save and exit.
>>>
>>> Then try:
>>>
>>> butch install kernel
>>>
>>>
>>> Regards
>>> Paul
>>>
>>> On Mon, Dec 15, 2014 at 12:43 AM, will cunningham <willpanther@...il.com
>>> > wrote:
>>>>
>>>> Thanks so much Paul, I'm trying that next, but I had to compile Core to
>>>> get export. This ain't exactly flying along, but it's pretty cool that
>>>> once it's done we can just copy the SD card.
>>>>
>>>> Thanks for your help,
>>>>
>>>> Will
>>>>
>>>> On Sun, Dec 14, 2014 at 4:33 PM, Paul Schutte <sjpschutte@...il.com>
>>>> wrote:
>>>>>
>>>>> I ran out of disk space while compiling.
>>>>> I had a look at the build script and you are right.
>>>>>
>>>>> You have to set "export ARM_ARCH=6".
>>>>> It looks to me that you should set it in /src/config on your target
>>>>> filesystem.
>>>>>
>>>>> Regards
>>>>> Paul
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Sun, Dec 14, 2014 at 8:16 PM, will cunningham <
>>>>> willpanther@...il.com> wrote:
>>>>>>
>>>>>> Paul,
>>>>>> I think I did almost the same, except why did you uncomment A=1386?
>>>>>>
>>>>>> thanks,
>>>>>>
>>>>>> Will
>>>>>>
>>>>>> On Sun, Dec 14, 2014 at 12:09 PM, Paul Schutte <sjpschutte@...il.com>
>>>>>> wrote:
>>>>>>>
>>>>>>> Hi Will,
>>>>>>>
>>>>>>> I have compiled sabotage successfully on the Raspberry PI model B,
>>>>>>> albeit back in February of this year. (It took more than a week).
>>>>>>> You must copy KEEP/config.stage0 to config and edit as per the
>>>>>>> instructions at https://github.com/sabotage-linux/sabotage.
>>>>>>> I just did a fresh git clone and it is busy compiling at the moment.
>>>>>>>
>>>>>>> Here is the changes I made to my config file:
>>>>>>>
>>>>>>> --- KEEP/config.stage0 2014-02-01 18:27:23.783217256 +0200
>>>>>>> +++ config 2014-02-01 18:29:47.166845189 +0200
>>>>>>> @@ -1,10 +1,10 @@
>>>>>>> ## set path to builddir (where you want your chroot).
>>>>>>> -export SABOTAGE_BUILDDIR="/tmp/sabotage"
>>>>>>> +export SABOTAGE_BUILDDIR="/home/pi/sbuild"
>>>>>>>
>>>>>>> ## set your arch, or try `uname -m`
>>>>>>> -export A=i386
>>>>>>> +#export A=i386
>>>>>>> #export A=x86_64
>>>>>>> -#export A=arm
>>>>>>> +export A=arm
>>>>>>> #export A=mips
>>>>>>> #export A=powerpc
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> And my PI info:
>>>>>>> root@...pberrypi:~# lsb_release -a
>>>>>>> Distributor ID: Debian
>>>>>>> Description: Debian GNU/Linux 7.2 (wheezy)
>>>>>>> Release: 7.2
>>>>>>> Codename: wheezy
>>>>>>>
>>>>>>>
>>>>>>> Regards
>>>>>>> Paul
>>>>>>>
>>>>>>> On Sun, Dec 14, 2014 at 7:15 PM, will cunningham <
>>>>>>> willpanther@...il.com> wrote:
>>>>>>>>
>>>>>>>> I'm trying to build Sabotage on a Raspberry PI version B inside
>>>>>>>> Raspbian.
>>>>>>>>
>>>>>>>> It's failing at compiling the kernel with the log reading,
>>>>>>>>
>>>>>>>> "error: need to set ARM_ARCH to 4-7"
>>>>>>>>
>>>>>>>> and the next line,
>>>>>>>>
>>>>>>>> "cat: can't open '/src/KEEP/linux.config
>>>>>>>> /src/KEEP/linux.config.armvl' : No such file or directory"
>>>>>>>>
>>>>>>>> There is a linux.config.armv6l file in /src/KEEP so it seems I need
>>>>>>>> to set ARM_ARCH=6 somewhere?
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>>
>>>>>>>> Will
>>>>>>>>
>>>>>>>
Content of type "text/html" skipped
Powered by blists - more mailing lists
Confused about mailing lists and their use?
Read about mailing lists on Wikipedia
and check out these
guidelines on proper formatting of your messages.
