[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <EIEAIODGBKOFFGDNBPFEOEHOCBAA.andis@bossmail.de>
Date: Wed, 3 Jul 2002 16:54:58 +0200
From: "Andi" <andis@...smail.de>
To: <popa3d-users@...ts.openwall.com>
Subject: AW: logging problems...
it doesn?t work...
i changed the params.h and the makefile.
then make and make install
the entry in the /etc/inetd.conf was already there
--> kill -HUP `cat /var/run/inetd.pid`
and the test went wrong.
popa3d logs in /var/log/messages when i contact my mailbox with a client
greets andi
-----Ursprungliche Nachricht-----
Von: Solar Designer [mailto:solar@...nwall.com]
Gesendet: Mittwoch, 3. Juli 2002 16:17
An: popa3d-users@...ts.openwall.com
Betreff: Re: logging problems...
On Wed, Jul 03, 2002 at 11:41:29AM +0200, Andi wrote:
> this is not too complicated for me...(i hope so...)
> i put the LOG_LOCAL0 in this section:
>
> #define SYSLOG_IDENT "popa3d"
> #define SYSLOG_OPTIONS LOG_PID
> #define SYSLOG_FACILITY LOG_DAEMON
> #define SYSLOG_PRIORITY LOG_NOTICE
> #define LOG_LOCAL0
This is wrong. You were supposed to change the #define SYSLOG_FACILITY
to use LOG_LOCAL0 instead of LOG_DAEMON.
> params.h:162: warning: `LOG_LOCAL0' redefined
This is because of you doing the wrong thing as I've just explained.
> auth_shadow.o: In function `auth_userpass':
> auth_shadow.o(.text+0xbd): undefined reference to `crypt'
> auth_shadow.o(.text+0xd2): undefined reference to `crypt'
And this is because you need -lcrypt as Michael Meyer has correctly
pointed out (and as explained in INSTALL which you should have read).
> i?m using the popa3d-0.5.tar.gz
Why not 0.5.1?
> -----Ursprungliche Nachricht-----
> Von: Solar Designer [mailto:solar@...nwall.com]
> Gesendet: Sonntag, 30. Juni 2002 21:19
> An: popa3d-users@...ts.openwall.com
> Betreff: Re: logging problems...
>
>
> On Sun, Jun 30, 2002 at 09:07:07PM +0200, Andi wrote:
> > --> yes i?m using the included package in slackware. i didn?t compiled
it
> > myself.
> > i?m a linux newbee...can you explain exactly what to do?
> > i?ve to remove the old package and compile the new one by myself with
> which
> > options?
>
> The old package you don't have to touch. You may just build popa3d
> from source, without producing a package out of it. Just download the
> original popa3d source tarball and follow the instructions in INSTALL.
> Among the instructions it says to review and edit params.h, which you
> need to do. Allocate a unique facility to popa3d, say, LOG_LOCAL0.
> Then use the newly built popa3d binary instead of the one that came
> with Slackware (edit the inetd.conf line). Finally, edit syslog.conf
> to route the local0 facility wherever you like.
>
> If this is still too complicated for you, then this list is probably
> not the right place for further questions on how to setup logging as
> that would be in no way specific to popa3d.
>
> --
> /sd
--
/sd
Powered by blists - more mailing lists
Confused about mailing lists and their use?
Read about mailing lists on Wikipedia
and check out these
guidelines on proper formatting of your messages.
