[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200330022023.3691-4-yanaijie@huawei.com>
Date: Mon, 30 Mar 2020 10:20:20 +0800
From: Jason Yan <yanaijie@...wei.com>
To: <mpe@...erman.id.au>, <linuxppc-dev@...ts.ozlabs.org>,
<diana.craciun@....com>, <christophe.leroy@....fr>,
<benh@...nel.crashing.org>, <paulus@...ba.org>, <npiggin@...il.com>,
<keescook@...omium.org>, <kernel-hardening@...ts.openwall.com>,
<oss@...error.net>
CC: <linux-kernel@...r.kernel.org>, <zhaohongjiang@...wei.com>,
<dja@...ens.net>, Jason Yan <yanaijie@...wei.com>
Subject: [PATCH v5 3/6] powerpc/fsl_booke/64: implement KASLR for fsl_booke64
The implementation for Freescale BookE64 is similar as BookE32. One
difference is that Freescale BookE64 set up a TLB mapping of 1G during
booting. Another difference is that ppc64 needs the kernel to be
64K-aligned. So we can randomize the kernel in this 1G mapping and make
it 64K-aligned. This can save some code to creat another TLB map at
early boot. The disadvantage is that we only have about 1G/64K = 16384
slots to put the kernel in.
To support secondary cpu boot up, a variable __kaslr_offset was added in
first_256B section. This can help secondary cpu get the kaslr offset
before the 1:1 mapping has been setup.
Signed-off-by: Jason Yan <yanaijie@...wei.com>
Cc: Scott Wood <oss@...error.net>
Cc: Diana Craciun <diana.craciun@....com>
Cc: Michael Ellerman <mpe@...erman.id.au>
Cc: Christophe Leroy <christophe.leroy@....fr>
Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Cc: Paul Mackerras <paulus@...ba.org>
Cc: Nicholas Piggin <npiggin@...il.com>
Cc: Kees Cook <keescook@...omium.org>
---
arch/powerpc/Kconfig | 2 +-
arch/powerpc/kernel/exceptions-64e.S | 10 ++++
arch/powerpc/kernel/head_64.S | 6 +++
arch/powerpc/kernel/setup_64.c | 3 ++
arch/powerpc/mm/mmu_decl.h | 20 ++++----
arch/powerpc/mm/nohash/kaslr_booke.c | 75 +++++++++++++++++++---------
6 files changed, 83 insertions(+), 33 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 497b7d0b2d7e..0c76601fdd59 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -564,7 +564,7 @@ config RELOCATABLE
config RANDOMIZE_BASE
bool "Randomize the address of the kernel image"
- depends on (FSL_BOOKE && FLATMEM && PPC32)
+ depends on (PPC_FSL_BOOK3E && FLATMEM)
depends on RELOCATABLE
help
Randomizes the virtual address at which the kernel image is
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 1b9b174bee86..260cf1f1e71c 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -1378,6 +1378,7 @@ skpinv: addi r6,r6,1 /* Increment */
1: mflr r6
addi r6,r6,(2f - 1b)
tovirt(r6,r6)
+ add r6,r6,r19
lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l
mtspr SPRN_SRR0,r6
@@ -1400,6 +1401,7 @@ skpinv: addi r6,r6,1 /* Increment */
/* We translate LR and return */
tovirt(r8,r8)
+ add r8,r8,r19
mtlr r8
blr
@@ -1528,6 +1530,7 @@ a2_tlbinit_code_end:
*/
_GLOBAL(start_initialization_book3e)
mflr r28
+ li r19, 0
/* First, we need to setup some initial TLBs to map the kernel
* text, data and bss at PAGE_OFFSET. We don't have a real mode
@@ -1570,6 +1573,12 @@ _GLOBAL(book3e_secondary_core_init)
cmplwi r4,0
bne 2f
+ li r19, 0
+#ifdef CONFIG_RANDOMIZE_BASE
+ LOAD_REG_ADDR_PIC(r19, __kaslr_offset)
+ ld r19,0(r19)
+ rlwinm r19,r19,0,0,5
+#endif
/* Setup TLB for this core */
bl initial_tlb_book3e
@@ -1602,6 +1611,7 @@ _GLOBAL(book3e_secondary_core_init)
lis r3,PAGE_OFFSET@...hest
sldi r3,r3,32
or r28,r28,r3
+ add r28,r28,r19
1: mtlr r28
blr
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index ad79fddb974d..454129a3c259 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -104,6 +104,12 @@ __secondary_hold_acknowledge:
.8byte 0x0
#ifdef CONFIG_RELOCATABLE
+#ifdef CONFIG_RANDOMIZE_BASE
+ .globl __kaslr_offset
+__kaslr_offset:
+ .8byte 0x0
+#endif
+
/* This flag is set to 1 by a loader if the kernel should run
* at the loaded address instead of the linked address. This
* is used by kexec-tools to keep the the kdump kernel in the
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index e05e6dd67ae6..836e202dfd5b 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -67,6 +67,7 @@
#include <asm/kup.h>
#include <asm/early_ioremap.h>
+#include <mm/mmu_decl.h>
#include "setup.h"
int spinning_secondaries;
@@ -300,6 +301,8 @@ void __init early_setup(unsigned long dt_ptr)
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
+ kaslr_early_init(__va(dt_ptr), 0);
+
udbg_printf(" -> %s(), dt_ptr: 0x%lx\n", __func__, dt_ptr);
/*
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 605129b5ccdf..6efbd7fd88a4 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -139,22 +139,16 @@ extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
extern void adjust_total_lowmem(void);
extern int switch_to_as1(void);
extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
+#endif
void create_kaslr_tlb_entry(int entry, unsigned long virt, phys_addr_t phys);
extern int is_second_reloc;
-#endif
+extern unsigned long __kaslr_offset;
+extern unsigned int __run_at_load;
void reloc_kernel_entry(void *fdt, long addr);
extern void loadcam_entry(unsigned int index);
extern void loadcam_multi(int first_idx, int num, int tmp_idx);
-#ifdef CONFIG_RANDOMIZE_BASE
-void kaslr_early_init(void *dt_ptr, phys_addr_t size);
-void kaslr_late_init(void);
-#else
-static inline void kaslr_early_init(void *dt_ptr, phys_addr_t size) {}
-static inline void kaslr_late_init(void) {}
-#endif
-
struct tlbcam {
u32 MAS0;
u32 MAS1;
@@ -164,6 +158,14 @@ struct tlbcam {
};
#endif
+#ifdef CONFIG_RANDOMIZE_BASE
+void kaslr_early_init(void *dt_ptr, phys_addr_t size);
+void kaslr_late_init(void);
+#else
+static inline void kaslr_early_init(void *dt_ptr, phys_addr_t size) {}
+static inline void kaslr_late_init(void) {}
+#endif
+
#if defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_FSL_BOOKE) || defined(CONFIG_PPC_8xx)
/* 6xx have BATS */
/* FSL_BOOKE have TLBCAM */
diff --git a/arch/powerpc/mm/nohash/kaslr_booke.c b/arch/powerpc/mm/nohash/kaslr_booke.c
index 6ebff31fefcc..24ad34641869 100644
--- a/arch/powerpc/mm/nohash/kaslr_booke.c
+++ b/arch/powerpc/mm/nohash/kaslr_booke.c
@@ -228,10 +228,11 @@ static __init unsigned long get_usable_address(const void *fdt,
unsigned long start,
unsigned long offset)
{
+ unsigned long unit = IS_ENABLED(CONFIG_PPC32) ? SZ_16K : SZ_64K;
unsigned long pa;
unsigned long pa_end;
- for (pa = offset; (long)pa > (long)start; pa -= SZ_16K) {
+ for (pa = offset; (long)pa > (long)start; pa -= unit) {
pa_end = pa + regions.kernel_size;
if (overlaps_region(fdt, pa, pa_end))
continue;
@@ -268,24 +269,34 @@ static unsigned long __init kaslr_legal_offset(void *dt_ptr, unsigned long rando
unsigned long index;
unsigned long offset;
- /*
- * Decide which 64M we want to start
- * Only use the low 8 bits of the random seed
- */
- index = random & 0xFF;
- index %= regions.linear_sz / SZ_64M;
-
- /* Decide offset inside 64M */
- offset = random % (SZ_64M - regions.kernel_size);
- offset = round_down(offset, SZ_16K);
+ if (IS_ENABLED(CONFIG_PPC32)) {
+ /*
+ * Decide which 64M we want to start
+ * Only use the low 8 bits of the random seed
+ */
+ index = random & 0xFF;
+ index %= regions.linear_sz / SZ_64M;
+
+ /* Decide offset inside 64M */
+ offset = random % (SZ_64M - regions.kernel_size);
+ offset = round_down(offset, SZ_16K);
+
+ while ((long)index >= 0) {
+ offset = memstart_addr + index * SZ_64M + offset;
+ start = memstart_addr + index * SZ_64M;
+ koffset = get_usable_address(dt_ptr, start, offset);
+ if (koffset)
+ break;
+ index--;
+ }
+ } else {
+ /* Decide kernel offset inside 1G */
+ offset = random % (regions.linear_sz - regions.kernel_size);
+ offset = round_down(offset, SZ_64K);
- while ((long)index >= 0) {
- offset = memstart_addr + index * SZ_64M + offset;
- start = memstart_addr + index * SZ_64M;
+ start = memstart_addr;
+ offset = memstart_addr + offset;
koffset = get_usable_address(dt_ptr, start, offset);
- if (koffset)
- break;
- index--;
}
if (koffset != 0)
@@ -325,6 +336,7 @@ static unsigned long __init kaslr_choose_location(void *dt_ptr, phys_addr_t size
else
pr_warn("KASLR: No safe seed for randomizing the kernel base.\n");
+#ifdef CONFIG_PPC32
ram = min_t(phys_addr_t, __max_low_memory, size);
ram = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, true);
linear_sz = min_t(unsigned long, ram, SZ_512M);
@@ -332,6 +344,10 @@ static unsigned long __init kaslr_choose_location(void *dt_ptr, phys_addr_t size
/* If the linear size is smaller than 64M, do not randmize */
if (linear_sz < SZ_64M)
return 0;
+#else
+ ram = size;
+ linear_sz = min_t(unsigned long, size, SZ_1G);
+#endif
/* check for a reserved-memory node and record its cell sizes */
regions.reserved_mem = fdt_path_offset(dt_ptr, "/reserved-memory");
@@ -365,6 +381,14 @@ notrace void __init kaslr_early_init(void *dt_ptr, phys_addr_t size)
unsigned long offset;
unsigned long kernel_sz;
+ if (IS_ENABLED(CONFIG_PPC64)) {
+ if (__run_at_load == 1)
+ return;
+
+ /* Get the first memblock size */
+ early_get_first_memblock_info(dt_ptr, &size);
+ }
+
kernel_sz = (unsigned long)_end - (unsigned long)_stext;
offset = kaslr_choose_location(dt_ptr, size, kernel_sz);
@@ -374,14 +398,19 @@ notrace void __init kaslr_early_init(void *dt_ptr, phys_addr_t size)
kernstart_virt_addr += offset;
kernstart_addr += offset;
- is_second_reloc = 1;
+ if (IS_ENABLED(CONFIG_PPC32)) {
+ is_second_reloc = 1;
- if (offset >= SZ_64M) {
- tlb_virt = round_down(kernstart_virt_addr, SZ_64M);
- tlb_phys = round_down(kernstart_addr, SZ_64M);
+ if (offset >= SZ_64M) {
+ tlb_virt = round_down(kernstart_virt_addr, SZ_64M);
+ tlb_phys = round_down(kernstart_addr, SZ_64M);
- /* Create kernel map to relocate in */
- create_kaslr_tlb_entry(1, tlb_virt, tlb_phys);
+ /* Create kernel map to relocate in */
+ create_kaslr_tlb_entry(1, tlb_virt, tlb_phys);
+ }
+ } else {
+ __kaslr_offset = kernstart_virt_addr - KERNELBASE;
+ __run_at_load = 1;
}
/* Copy the kernel to it's new location and run */
--
2.17.2
Powered by blists - more mailing lists
Confused about mailing lists and their use?
Read about mailing lists on Wikipedia
and check out these
guidelines on proper formatting of your messages.
