[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191024225132.13410-2-samitolvanen@google.com>
Date: Thu, 24 Oct 2019 15:51:16 -0700
From: samitolvanen@...gle.com
To: Will Deacon <will@...nel.org>, Catalin Marinas <catalin.marinas@....com>,
Steven Rostedt <rostedt@...dmis.org>, Masami Hiramatsu <mhiramat@...nel.org>,
Ard Biesheuvel <ard.biesheuvel@...aro.org>
Cc: Dave Martin <Dave.Martin@....com>, Kees Cook <keescook@...omium.org>,
Laura Abbott <labbott@...hat.com>, Mark Rutland <mark.rutland@....com>,
Nick Desaulniers <ndesaulniers@...gle.com>, Jann Horn <jannh@...gle.com>,
Miguel Ojeda <miguel.ojeda.sandonis@...il.com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>, clang-built-linux@...glegroups.com,
kernel-hardening@...ts.openwall.com, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Sami Tolvanen <samitolvanen@...gle.com>
Subject: [PATCH v2 01/17] arm64: mm: don't use x18 in idmap_kpti_install_ng_mappings
idmap_kpti_install_ng_mappings uses x18 as a temporary register, which
will result in a conflict when x18 is reserved. Use x16 and x17 instead
where needed.
Signed-off-by: Sami Tolvanen <samitolvanen@...gle.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@...gle.com>
---
arch/arm64/mm/proc.S | 63 ++++++++++++++++++++++----------------------
1 file changed, 32 insertions(+), 31 deletions(-)
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index a1e0592d1fbc..fdabf40a83c8 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -250,15 +250,15 @@ ENTRY(idmap_kpti_install_ng_mappings)
/* We're the boot CPU. Wait for the others to catch up */
sevl
1: wfe
- ldaxr w18, [flag_ptr]
- eor w18, w18, num_cpus
- cbnz w18, 1b
+ ldaxr w17, [flag_ptr]
+ eor w17, w17, num_cpus
+ cbnz w17, 1b
/* We need to walk swapper, so turn off the MMU. */
pre_disable_mmu_workaround
- mrs x18, sctlr_el1
- bic x18, x18, #SCTLR_ELx_M
- msr sctlr_el1, x18
+ mrs x17, sctlr_el1
+ bic x17, x17, #SCTLR_ELx_M
+ msr sctlr_el1, x17
isb
/* Everybody is enjoying the idmap, so we can rewrite swapper. */
@@ -281,9 +281,9 @@ skip_pgd:
isb
/* We're done: fire up the MMU again */
- mrs x18, sctlr_el1
- orr x18, x18, #SCTLR_ELx_M
- msr sctlr_el1, x18
+ mrs x17, sctlr_el1
+ orr x17, x17, #SCTLR_ELx_M
+ msr sctlr_el1, x17
isb
/*
@@ -353,46 +353,47 @@ skip_pte:
b.ne do_pte
b next_pmd
+ .unreq cpu
+ .unreq num_cpus
+ .unreq swapper_pa
+ .unreq cur_pgdp
+ .unreq end_pgdp
+ .unreq pgd
+ .unreq cur_pudp
+ .unreq end_pudp
+ .unreq pud
+ .unreq cur_pmdp
+ .unreq end_pmdp
+ .unreq pmd
+ .unreq cur_ptep
+ .unreq end_ptep
+ .unreq pte
+
/* Secondary CPUs end up here */
__idmap_kpti_secondary:
/* Uninstall swapper before surgery begins */
- __idmap_cpu_set_reserved_ttbr1 x18, x17
+ __idmap_cpu_set_reserved_ttbr1 x16, x17
/* Increment the flag to let the boot CPU we're ready */
-1: ldxr w18, [flag_ptr]
- add w18, w18, #1
- stxr w17, w18, [flag_ptr]
+1: ldxr w16, [flag_ptr]
+ add w16, w16, #1
+ stxr w17, w16, [flag_ptr]
cbnz w17, 1b
/* Wait for the boot CPU to finish messing around with swapper */
sevl
1: wfe
- ldxr w18, [flag_ptr]
- cbnz w18, 1b
+ ldxr w16, [flag_ptr]
+ cbnz w16, 1b
/* All done, act like nothing happened */
- offset_ttbr1 swapper_ttb, x18
+ offset_ttbr1 swapper_ttb, x16
msr ttbr1_el1, swapper_ttb
isb
ret
- .unreq cpu
- .unreq num_cpus
- .unreq swapper_pa
.unreq swapper_ttb
.unreq flag_ptr
- .unreq cur_pgdp
- .unreq end_pgdp
- .unreq pgd
- .unreq cur_pudp
- .unreq end_pudp
- .unreq pud
- .unreq cur_pmdp
- .unreq end_pmdp
- .unreq pmd
- .unreq cur_ptep
- .unreq end_ptep
- .unreq pte
ENDPROC(idmap_kpti_install_ng_mappings)
.popsection
#endif
--
2.24.0.rc0.303.g954a862665-goog
Powered by blists - more mailing lists
Confused about mailing lists and their use?
Read about mailing lists on Wikipedia
and check out these
guidelines on proper formatting of your messages.
