[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <tkggwmpgmqj3vujgtqaugqajjuuot2areurrayhbumy5dsrhrz@sejaur5ldzhl>
Date: Fri, 28 Jul 2023 21:25:12 +0800
From: Ruihan Li <lrh2000@....edu.cn>
To: oss-security@...ts.openwall.com
Cc: Ruihan Li <lrh2000@....edu.cn>
Subject: Re: StackRot (CVE-2023-3269): Linux kernel privilege escalation
vulnerability
Hi all,
The PoC code and exploit write-up of the StackRot vulnerability has been
published to [GitHub][gh]. I'm going to copy the write-up here, but I
recommend the GitHub version because there are some figures embedded.
[gh]: https://github.com/lrh2000/StackRot
Besides, the exploit is verified by the GitHub CI. Therefore, the most
straightforward way to understand how this exploit operates without
having to set up a local environment is by reviewing the GitHub CI pass
procedure, which can be found [here][ci].
[ci]: https://github.com/lrh2000/StackRot/actions
## Exploit
The exploit primarily focuses on the Google kCTF challenge, specifically when
neither CONFIG_PREEMPT nor CONFIG_SLAB_MERGE_DEFAULT is set. To exploit
StackRot, the most important task is to locate a VMA iteration that fulfills
the following criteria:
1. The iteration's timing can be controlled. This control allows us to ensure
that the RCU grace period concludes during the VMA iteration.
2. The iteration retrieves specific information from the VMA structure, and
returns the information to the userspace. This feature enables us to
exploit the UAF vulnerability of the maple node to leak some kernel
addresses.
3. The iteration invokes certain function pointers in the VMA structure. This
particular capability allows us to exploit the UAF of the maple node to
control the kernel-mode program counter (PC).
The chosen VMA iteration is the iteration responsible for generating the
contents of `/proc/[pid]/maps`. The following sections will show how this
iteration satisfies the above criteria.
### Step 0: From UAFBR to UAF
During any VMA iteration, the reference to the root node of the VMA tree is
obtained, and the iteration proceeds through its slots. Thus, by triggering
stack expansion in another thread on a separate CPU during the VMA iteration,
the node replacement can be concurrently initiated. At this point, accessing
the old node is considered a use-after-free-by-RCU (UAFBR) situation. However,
actual issues arise only when the old node is truly freed, which occurs in the
RCU callback.
This presents two challenges: (i) determining when the old node is freed and
(ii) ensuring that the VMA iteration does not complete before the old node is
freed.
The first question is relatively straightforward. In the kernel, the
`synchronize_rcu()` function can be employed to wait until the RCU grace period
concludes, ensuring that all pre-existing RCU callbacks have been invoked. In
userspace, system calls that ultimately call `synchronize_rcu()` can be
utilized for the same purpose. Thus, when such system calls terminate, it is
known that the old node has been freed. Notably, there is a system call,
`membarrier(MEMBARRIER_CMD_GLOBAL, 0, -1)`, that solely invokes
`synchronize_rcu()`.
```c
SYSCALL_DEFINE3(membarrier, int, cmd, unsigned int, flags, int, cpu_id)
{
// ...
switch (cmd) {
// ...
case MEMBARRIER_CMD_GLOBAL:
/* MEMBARRIER_CMD_GLOBAL is not compatible with nohz_full. */
if (tick_nohz_full_enabled())
return -EINVAL;
if (num_online_cpus() > 1)
synchronize_rcu();
return 0;
// ...
}
}
```
The second question necessitates further consideration. Several potential
solutions are as follows:
1. The iteration task gets preempted, the RCU grace period ends, and the
iteration resumes execution. However, this approach is ineffective if
CONFIG_PREEMPT is not set.
2. The iteration task enters a sleep state (e.g., waiting for I/O), the RCU
grace period ends, and the iteration continues. Currently, I am unaware of
any VMA iteration that satisfies this requirement and can be exploited to
leak kernel addresses and control the program counter (PC). It may exist,
but a thorough investigation is required.
3. The iteration task experiences an interruption (e.g., timer interrupt),
during which the RCU grace period concludes. It is possible to employ
timerfd to create multiple hardware timers that, upon timeout during the
VMA iteration, can trigger a lengthy interrupt. However, this approach is
not viable because the interrupt handler operates with interrupts disabled,
and if a CPU cannot handle inter-processor interrupts (IPIs), the RCU grace
period will not end.
4. The iteration task is deliberately prolonged, allowing the RCU grace period
to expire. This is the chosen solution. If the current RCU grace period
surpasses RCU_TASK_IPI_DELAY (defaulting to 0.5 seconds), inter-processor
interrupts (IPIs) are dispatched to all CPUs to verify that they are not in
RCU critical sections. In the case of VMA iteration, the answer is
negative, signifying that the RCU grace period concludes and the maple node
is freed, effectively converting UAFBR into a genuine use-after-free (UAF)
scenario.
One significant observation is that during VMA iteration for
`/proc/[pid]/maps`, it generates the entire file path for file-mapped memory
regions. Although the directory name is typically restricted to a maximum of
255 characters, there is no limitation on the directory depth. This means that
by creating a file with an exceedingly large directory depth and establishing a
memory mapping for this file, accessing `/proc/[pid]/maps` can take a
considerable amount of time during the VMA iteration. Consequently, this
extended duration enables the possibility of concluding the RCU grace period
and acquiring the UAF primitive.
```c
static void
show_map_vma(struct seq_file *m, struct vm_area_struct *vma)
{
// ...
/*
* Print the dentry name for named mappings, and a
* special [heap] marker for the heap:
*/
if (file) {
seq_pad(m, ' ');
/*
* If user named this anon shared memory via
* prctl(PR_SET_VMA ..., use the provided name.
*/
if (anon_name)
seq_printf(m, "[anon_shmem:%s]", anon_name->name);
else
seq_file_path(m, file, "\n");
goto done;
}
// ...
}
```
This step is illustrated in the following figure:
### Step 1: From slab UAF to page UAF
Now that UAF is functioning within a slab. If CONFIG_SLAB_MERGE_DEFAULT is
enabled and the slab of maple nodes merges with kmalloc-256, the contents
within the old node can be controlled by allocating a new structure from
kmalloc-256 and populating it with userspace data. However, if
CONFIG_SLAB_MERGE_DEFAULT is not set, an alternative approach is required. In
this case, one needs to return the page of the freed node to the page
allocator, allowing the old node to be controlled by allocating a new page and
filling it accordingly.
Recall that the VMA tree will only contain one node. Hence, by utilizing
`fork()`/`clone()`, multiple VMA trees and an equal number of maple nodes are
generated. Assuming one slab encompasses M maple nodes, and one node per M
nodes is retained while all other nodes are freed via `exit()`, the remaining
nodes become the sole nodes within their respective slabs. Initially, these
slabs reside in the CPU's partial list. When the partial list reaches its
capacity, the slabs are flushed back to the partial list of the corresponding
NUMA node.
If the last maple node within a slab is freed, the slab becomes empty. If this
slab resides in the partial list of a NUMA node, and the partial list of that
particular NUMA node is already at maximum capacity, the page is immediately
returned to the page allocator. Consequently, the slab UAF transforms into a
page UAF scenario. The contents within the freed page can be manipulated by
sending some data via `msgsnd()`, which allocates elastic objects and directly
populates them with the provided user data.
```c
static void __slab_free(struct kmem_cache *s, struct slab *slab,
void *head, void *tail, int cnt,
unsigned long addr)
{
// ...
if (unlikely(!new.inuse && n->nr_partial >= s->min_partial))
goto slab_empty;
// ...
return;
slab_empty:
// ...
discard_slab(s, slab);
}
```
The number of maple nodes per slab, M, depends on the number of CPUs. The
exploit implementation considers a situation with two CPUs and therefore
assumes 16 as the value of M, as illustrated in the following figure:
### Step 2: From UAF to address leaking
Upon gaining control of the maple node, it becomes possible to manipulate the
addresses of subsequent VMAs that will be later iterated. As the targeted
iteration is aimed at generating `/proc/self/maps`, certain VMA information,
such as the start and end addresses, which reside within the VMA structure, are
returned to the user space.
However, a challenge arises: the address of a VMA structure in the maple node
can only be appropriately set if some addresses are already known. Fortunately,
CVE-2023-0597 directly serves this purpose. According to CVE-2023-0597, the
address of `cpu_entry_area` is not randomized. Although this vulnerability has
been patched in Linux 6.2, it has not been backported to earlier stable kernels
as of the time of writing. Consequently, by overwriting the address of the VMA
structure with that of the last IDT entry, the entry that contains the address
of `asm_sysvec_spurious_apic_interrupt` is directly leaked, thereby revealing
the base addresses of the kernel code and kernel data.
The previously discussed method can be used recurrently to incrementally expose
more addresses from the kernel data section. For instance, the
`init_task.tasks.prev` pointer within the data section directs to the
`task_struct` structure of the latest created task, which is without question
allocated on the heap.
When all newly established tasks are terminated, their `task_struct` structures
will subsequently be deallocated. If the quantity of these tasks is large
enough, the corresponding pages can be surrendered back to the page allocator.
This allows for the possibility to reallocate these pages and fill them with
user data. However, keep in mind that the released pages generally belong to
the per-cpu page (PCP) list. For pages present in the PCP list, they can be
reallocated exclusively in the same page order. Consequently, solely mapping
new pages into the user space, which requires only order-0 pages from the page
allocator, won't fulfill the objectives.
Nonetheless, the msgsnd system call will solicit memory chunks via kmalloc and
populate these chunks with user-defined data. When the kmalloc cache is
exhausted, it will requisition pages from the page allocator at a specific
order. If the message size is accurately adjusted, the exact order will be
desired. Thus, the page whose address has been previously leaked will be
reallocated. As a result, it becomes possible to obtain a page with a known
address and user-manipulated data.
### Step 3: From UAF to root privileges
It is now possible to forge the VMA structure in the address-known page and
control the `vma->vm_ops->name` function pointer. The next step involves
finding suitable gadgets to escape containers and acquire root privileges.
```c
static void
show_map_vma(struct seq_file *m, struct vm_area_struct *vma)
{
// ...
if (vma->vm_ops && vma->vm_ops->name) {
name = vma->vm_ops->name(vma);
if (name)
goto done;
}
// ...
}
```
The gadget constructions are as follows:
1. Stack pivot: `movq %rbx, %rsi; movq %rbp, %rdi; call
__x86_indirect_thunk_r13` -> `pushq %rsi; jmp 46(%rsi)` -> `popq %rsp; ret`
-> `popq %rsp; ret`, where %rdi, %rbx, and %r13 _initially_ points to
user-controllable data.
2. Gain root privileges: `popq %rdi; ret` -> `prepare_kernel_cred` -> `popq
%rdi; ret` -> `movq %rax, (%rdi); ret`, where %rdi _now_ points to the
stack top; `popq %rdi; ret` -> `commit_creds`, effectively executing
`commit_creds(prepare_kernel_cred(&init_task))`.
3. Escape containers: `popq %rdi; ret` -> `find_task_by_vpid` -> `popq %rdi;
ret` -> `movq %rax, (%rdi); ret`, where %rdi _now_ points to the stack top;
`popq %rdi; ret` -> `popq %rsi; ret` -> `switch_task_namespaces`,
effectively performing `switch_task_namespaces(find_task_by_vpid(1),
&init_nsproxy)`.
4. Unlock mm: `popq %rax; ret` -> `movq %rbp, %rdi; call
__x86_indirect_thunk_rax`, where %rbp points to the original seq_file;
`popq %rax; ret` -> `m_stop`, effectively executing `m_stop(seq_file, ..)`.
5. Return to userspace: use `swapgs_restore_regs_and_return_to_usermode`, and
call `execve()` to get the shell.
Finally, using `nsenter --mount=/proc/1/ns/mnt` to restore the mount namespace
and get the flag via `cat /flag/flag`.
### Source code
The full exploit source is available [here][exp]. For more details, refer to
its README file.
[exp]: https://github.com/lrh2000/StackRot/tree/master/exp
Thanks,
Ruihan Li
Powered by blists - more mailing lists
Please check out the
Open Source Software Security Wiki, which is counterpart to this
mailing list.
Confused about mailing lists and their use?
Read about mailing lists on Wikipedia
and check out these
guidelines on proper formatting of your messages.
